1
DIGITUS Plug&View
OptiVision / OptiArc / OptiMax /
Optimax Pro
User Manual
DN-16027 / DN-16036 / DN-16037 / DN-16040
DN-16036
DN-16037/DN-16040
DN-16027
2
1 Introduction:
DIGITUS Plug&View series of IP cameras offers P2P Cloud service to avoid those complicated
network setting for camera installation. All you need is just “Plug&View” with 3 simple steps.
2 Package Content:
- IP camera x 1
- Power supply x 1
- Ethernet cable x 1
- Support CD x 1
- Mounting accessory x 1
- * DN-16040 has additional 2GB TF card included.
3 Installation Procedures:
3.1 Getting connected
1. Power on the camera and connect the Ethernet cable from the camera to the router.
Please make sure that the router is setup to be able to access Internet.
2. Open a browser (Internet Explorer, Google Chrome, Mozilla Firefox...) and key in
http://mydigitus.net/
to access DIGITUS Plug&View Website. Press “LOGIN” to enter the
login portal. Please create an account for first use. Alternatively, you can also use your
existing Google account to login by pressing “Google Login”. Then enter your account
and password.
3
Alternatively you can also download “DIGITUS Plug&View” APP from APP store
or Google Play and execute this APP from your mobile devices and login the account
and password instead of using browser.
4
3. With browser, please key in the MAC address and Activation code as shown on the last
page of the QIG to add camera under your account. After press “Apply”, it will show
“Success”.
Alternatively the easiest way to add camera without key-in long numbers is using the
smart phone to scan the QR code on the last page of the QIG using “DIGITUS
Plug&View” APP from your mobile devices.
After adding the camera, you can have live-view anytime anywhere.
3.2 Getting connected wirelessly
Wireless (WiFi) connection between IP cameras and Wireless router / Access point is also
available with the following procedures.
4. After completing Step 1 ~ 3 for wired connection with Ethernet cable, login into
http://login.mydigitus.net/
and click the setting icon to enter camera user interface.
5
After entering Camera User Interface from DIGITUS Plug&View website through setting icon
, please key in “admin” for the Username and “admin” for the Password to login.
At the first viewing of the IP camera, the browser will prompt the users to install the OCX
component.
Note: If the users didn’t install the ‘OCX’ before, please click the link on the page: ‘Please
install the ActiveX widget RSAV.exe’. Or directly in the upper right corner to download OCX
After the download installed directly, refresh or re-login the IE interface. Then the IE will go to
default page and show the preview image.
6
5. Go to “Parameter” => “Network”. Select the WiFi button and the SSIDs of your available
Wireless router or Access point will pop-up on the screen. Please select the SSID you
want to connect to and key in the password if it is encrypted. Press “OK” to apply the
changes.
Loading...