Page 1
DisplayPort Repeater
User's Manual
DS-52900
Page 2
Features:
Extend DisplayPort signal up to 15M @ WQXGA (2560 x 1600) over
cable
Compatible with most of the popular screen resolution to XGA, SXGA,
UXGA, WSXGA Full HD, WUXGA, WQXGA system
EQ (sharpness) adjustment by push button for optimal signal clarity
No software required ensuring Plug and Play operation
No external power supply required as it is powered by the source device
HDTV, 3D HDTV, HDCP compliant and Blu-ray ready
Package Contents:
● DisplayPort Repeater x 1
● USB Power Cable x 1
● USB Power Adaptor x 1
● User’s Manual x 1
Specifications:
Input
Output
Video Resolution (Max.)
Extension Distance (Max.)*
LED Indicator
Push Button
Data Rate (Max.)
Power Supply
Dimensions H x W x D (mm)
Weight (g)
* Extension distance is 15 meter on the source side and 5 meter on the monitor side. (1080p)
* Extension distance is 10 meter on the source side and 5 meter on the monitor side. (WQXGA)
NOTE: Plesase use standard cable for the best performance results, using other thinner cables, and
coiling of excess cable lengths should be avoided.
NOTE:
Idle time-out is 15 seconds.
The system will automatically retain user's last setting.
Some monitor will be blank screen when users adjust EQ level, it only need to
Directly replug the cable or quit EQ Adjustment Mode to do Hot Plugging.
DisplayPort x 1
DisplayPort x 1
WQXGA (2560 x 1600)
7M @ UHD (3840 x 2160 60Hz)
13M @ UHD (3840 x 2160 30Hz)
15M @ WQXGA (2560 x 1600)
20M @ Full HD (1920 x 1080)
Status (Dual color) x 1
EQ Adjust x 2
21.6 Gbps
DC 5V (mini USB)
12 x 80 x 50
155
Page 3
1. Connection Pattern:
2. Product Description:
Video Input Port Connect to DisplayPort source
Vi
Video Output Port Connect to DisplayPort monitor
Vo
Push Button Adjust EQ level
B1
B2
Power Supply Use USB cable to connect with power source
P
LED Indicator Power ON: Green
L
Power OFF: OFF
Page 4
3. EQ Adjustment Mode:
This function allows adjustments in sharpness of the video image for better
clarity. If necessary, adjust EQ level by two buttons to compensate cable
length.
Step1. Press B1 (+) or B2 (-) once to Enter in EQ Adjustment Mode
Step2. Press B1 (+) or B2 (-) to adjust EQ level.
LED will emit GREEN and flash RED indicating the EQ level. (Please
see LED Indicator section)
Step3. Press two buttons B1 (+) and B2 (-) simultaneously 3 sec. to quit EQ
Adjustment Mode and return to original status.
LED Indicator (in EQ Adjustment Mode)
NOTE:
1. When power on, the LED will be Steady GREEN (original status).
2. When enter in EQ Adjustment Mode, the LED will show the last EQ level setting.
Page 5
4. Factory Default Setting:
To avoid confusion in which EQ level has been set, this function enables to
reset the state to factory default (level 1).
Step1. Power off the unit. Press two buttons B1 (+) and B2 (-)
simultaneously.
Step2. Power on the unit. Hold the buttons for around 3 sec.
Step3. Release the buttons RIGHT AFTER the LED flashes RED and then it
returns to Steady GREEN light, which indicates the setting is
complete.
5. Hot Plugging
The purpose of Hot-plugging is like automatic re-plug cables without shutting
down the attached computer. It allows easy accessibility to equipment and the
convenience of uninterrupted systems.
Step1. Press two buttons B1 (+) and B2 (-) simultaneously
Step2. Release the buttons RIGHT AFTER the LED flashes GREEN and
then, it returns to Steady GREEN light, which indicate the Hot
Plugging is complete.
(not use in EQ Adjustment Mode)
Page 6
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive
2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested
by post under the below mentioned manufacturer address.
Note:
If wrongly installed or improperly used in the living area, the device can cause interference in
radios and other electronic devices. Appropriate use is when the device, as far as feasible, is
operated with shielded connection cables (with network products in addition to category 5
shielded cables and higher). The device has been tested and falls within the limits of class A
computing equipment according to the requirements of EN 55022.
Warning:
This device conforms with test category A - it can cause radio interference in the living area; in
this case the operator may demand that appropriate measures are implemented and arise for
this reason. Declaration of conformity: The device fulfills the EMV requirements according to
EN 55022 for ITE and EN 55024 class A. Devices with external or integrated power supply
furthermore fulfill the requirements of EN 61000-3-2 and EN 61000-3-3. In this way, the
fundamental protection requirements of the EMV-2014/30/EU guideline are fulfilled.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Loading...