Page 1
4K HDMI Switch, 3x1
Quick Installation Guide
DS-48304
Page 2
INTRODUCTION:
This is an intelligent 4K2K HDMI 3X1 Amplifier Switcher. It allows three HDMI
source devices switched into one HD monitor or projector. Adopted touch
button design lets you enjoy the high technology and easy switching life. This
intelligent Switcher is quite different from other switchers. It has one input port
on the front panel. This not only reduced the switcher to an ideal small size but
also be more convenient for users to connect the source devices.
FEATURES:
This HDMI 4K2K Amplifier Switcher has many features that enable it to
perform in a superior manner. Among those features you will find:
Multi-switching methods: intelligent, IR remote or by touch button
Supports highest video resolution up to 4K2K.
Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
Supports 16bit per channel (48bit all channel) deep color.
HDCP pass-through.
Supports uncompressed audio such as LPCM.
Supports compressed audio such as DTS Digital.
Support 3D all format, including 1080p@23.98/24Hz, 720p@
59.94/60Hz/50Hz.
PACKAGE CONTENTS:
4K HDMI Switch
5V/2A DC Power Supply Adaptor
4 x Rubber Foot
Quick Installation Guide
Remote controller
CONNECTION AND OPERATION:
1) Connect input ports of this Switcher to each HDMI source device.
(Input cables are optional) Please refer to connection diagram section.
2) Connect output port of this Switcher to HD display.
3) Insert the DC side of 5v power supply into the HDMI switch and then
connect the AC side of the power supply into the wall outlet.
4) Turn on the power. Attention: Insert / Extract cable gently.
Page 3
CONNECTION DIAGRAM:
Page 4
SPECIFICATIONS:
Note 1: Specifications are subject to change without notice
Note 2:
External power supply unit, Manufacturer: Dongguan MLF Tech. Co., Ltd.;
Model name: MLF-A00150502000FE0001;
Rating, Input: 100-240 V~, 50/60 Hz, 0,5 A Max; Output: 5,0 V
, 2 A;
“the apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.” the MAINS plug is used as the disconnect
device, the disconnect device shall remain readily operable”
Loading...