Digitus DS-47110-1, DS-48110-1 User manual

VIDEO MATRIX

2 in 2 Out
(DS-47110-1)

2 in 4 Out
(DS-48110-1)

Introduction

Through the video matrix, you can use 2 PCs to display
the diverse images on 2 or 4 monitors; meanwhile, opti­onal means for controlling monitor´s image either come
from PC „A“ or PC „B“ or just switching off.

Video matrix is ideal for:

• Test bench facilities

• Data center

• Help desks

• Video broadcasting:
Presentation
Stock quotes
Timetables
Educational facilities

Features

• Intelligent functionality.

• With 250 MHz pixel frequency.

• Extends the video signal up to 65 meter (213´´).

• Supports the DDC, DDC2, DDC2B. (For video out port
1 and 2)

• Can be cascaded.

• The output is compatible with standard VGA card.

• Free select from PC (A) or PC (B) or switch off by
means of the front panel switch.

Specifications

Function 2 port 4 port

Video Input Connector

(HD-15 Female)

Video Output Connector

(HD-15 Female)

Select Switch 2 4

Linked LEDs

Max. Resolution 1920 x 1440 60 Hz

Pixel Frequency 250 MHz

Cable Distance

(Device to Monitor)

Power Adapter (Min.) DC12V 1A

Dimensions (LxWxH) 130 x 75 x 42 mm

A (Green) 2 4

B (Red) 2 4

Signal Type VGA, SVGA, XGA, Multisync

Housing Metal

Weight 420 g 455 g

2 2

2 4

65 m (213´´) Max.

Technical Specifications
Input/Output Signal

USER MANUAL

Package Contens

• 1 video matrix

• 1 user manual

• 1 DC12V 1A power adapter
Any thing missed, please contact with your vendor.

-1-

Pin# Signal

1 Red video

2 Green video

3 Blue video

4 ID2 *

5 Ground

6 Analog ground

7 Analog ground

8 Analog ground

* For video out port 1 and 2.

Pin# Signal

9 NC

10 Ground

11 ID0 *

12 ID1 *

13 Horizontal sync

14 Vertical sync

15 ID3 *

-2-

FRONT VIEW

(1)

(2)

1. Select

2. (A), (B) Linked

REAR VIEW

Installation

1. Turn off the PCs and monitors.

2. Connect the HD-15 video extension cable between
the VGA card of PCs and the „video in“ port of matrix.

3. Connect the HD-15 video extension cables between
the monitors and the „video out“ port of matrix.

4. Connect the power cord and turn on the matrix.

5. Turn on the PCs and monitors.

6. Control front panal switch to obtain the image either
come from PC (A) [Linked LED „(A)“ on] or PC (B)
[Linked LED “(B)” on] or just switching off. [Linked
LED “(A) (B)” off]
Note:

• All the “video out” ports will connect with the “video in”
port of (A) while turning on the video matrix.

• If you install the DDC monitor for the splitter, the rest
of moni
tors must be the same resolution as the DDC monitor.

• The functionality of DDC comes from „video in“ port of
(A) connecting with „video out“ port 1 as well as „video
in“ port of (B) connecting with „video out“ port 2.

• Available monitors include the VGA, SVGA, XGA,
Mulitsync, and exclude the CGA, EGA, Mono.

(1) (2) (3)

1. Input Power Jack.

2. (A), (B) „Video In“ Port

3. „Video Out“ Port

There are 2/4 out ports for the video matrix

-3-

Operation for cascade:

1. The function to display image on more monitors, you
request to attach video matrix or standard video
splitter.

2. Connect the HD-15 Male/Male video extension cable
between the former matrix of the „video out“ port and
the latter matrix of the „video in“ port.
Note:
Even though you are allowed to cascade the matrix with
varied ports, the image might become unstable if casca­de too many tiers of matrix.

P.S.: The example cascades the 2 and 4 port video
matrix; however, you can cascade the video matrix with
desired port.

-4-