Page 1
UHD HDMI Splitter, 1x8
Manual
DS-43304
With the DIGITUS UHD 8-Port HDMI splitter, a video signal can be divided into up to
eight playback devices (TVs, displays, monitors, projectors…etc.). It supports the best
possible UHD resolution (4K2K, 60Hz), and provides the ideal solution for commercial
applications such as for video wall presentations or product presentations (office/
business premises, exhibition booths, display windows, waiting rooms, catering, etc.).
1
Page 2
1.0 INTRODUCTION
This is a high-performance and small-sized HDMI Ultra High Definition Splitter with hot
plug and iron shell. It distributes the input of the HDMI signal into eight identical
outputs at the same time. It provides high performance audio and video output through
HDMI cables up to 4K2K@60Hz resolution and is capable of receiving and transmitting
up to 6Gbps/600MHz bandwidth.
2.0 FEATURES
This HDMI 1x8 Splitter has many features that enable it to perform in a superior manner.
Among those features you will find:
Easy to Use: Install in seconds, no need of setting
One HDMI Input, eight HDMI outputs
Support HDMI resolution max up to 4K2K@60Hz (4096x2160)
Support HDMI wide frequency max up to 600MHz
Support Full 3D
Support compressed audio such as DTS Digital, Dolby Digital
Support HDCP 2.2
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
Main units: UHD HDMI Splitter, 1x8
5V/3A DC power supply
User manual
2
Page 3
4.0 SPECIFICATIONS
Input/Output Connector
Input HDMI X1
Output HDMI X8
Operating Frequency
Vertical Frequency Range 24/30/50/60Hz
Video Amplifier Bandwidth 6Gbps/600MHz
Resolutions (HDTV)
Interlaced (50&60Hz) 480i, 576i, 1080i
Progressive (50&60Hz) Max up to 4kx2k@60Hz
Environmental
Operating Temperature 0°C to +45°C
Operating Humidity 10% to 85% RH (no condensation)
Storage Temperature -10°C to 70°C
Storage Humidity 5% to 90% RH (no condensation)
Power Requirement
External Power Supply 5V/3A
Power Consumption (Max) 10W
Note: Specifications are subject to change without notice.
5.0 CONNECTION PROCEDURE
1) Connect the HDMI video source to the HDMI input of the Splitter with one HDMI
cable (HDMI cables are optional)
* Please refer to connection diagram section
2) Connect the four outputs of the Splitter to eight displays
3) Turn on the power
3
Page 4
6.0 CONNECTION DIAGRAM
Application
Monitor/TV Monitor/TV
Monitor/TV Monitor/TV
PC/Notebook
Monitor/TV
Projector
Monitor/TV
Projector
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive 2011/65/EU for RoHS
compliance. The complete declaration of conformity can be requested by post under the below
mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment.
In this case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
4
Loading...