Digitus DS-43303 User Manual

4K HDMI Splitter, 8-Port

Manual

DS-43303

1.0 Introduction

The 8-port 4K HDMI splitter allows sharing eight HDMI displays or projectors
with an HDMI-enabled audio / video source device, such as a computer,
Blu-ray player or cable TV, set-top box. With support for Ultra HD (4K) the
HDMI splitter ensures astonishing picture quality, four times the resolution of
high-definition 1080p. The 4K splitter is also backward compatible with
previous HDMI revisions, supporting 1080p / 720p HDMI video resolution
devices. Even if you don't require 4K video today, the 8 ports splitter ensures
you'll be ready to take advantage of display technology in the future.

2.0 Feature

 Easy to Use: Install in seconds, no need of setting

 One HDMI Input, eight HDMI outputs

 Supports Full 3D and 4Kx2K@30Hz resolution

 Supports 340MHz/3.4Gbps per channel (10.2Gbps all channels)

 Supports 12bit per channel (36bit all channels) deep color

 Supports HDCP 1.4

 Supports uncompressed audio such as LPCM 7.1

 Supports compressed audio such as DTS Digital. Dolby Digital (including

DTS-HD and Dolby True HD)

3.0 Specification

Input DDC Signal 5 Volts p-p (TTL)

Maximum Single Link Range 4Kx2K@30Hz

HDCP support 1.4

Vertical Frequency Range 50/60Hz

Video Amplifier Bandwidth 3.4Gbps/340MHz

Interlaced Resolutions(50&60Hz) 480i,576i,1080i

Progressive Resolutions(50&60Hz) 480p,576p,720p,1080p,4Kx2K@30Hz

Size(L-W-H) 211x65x26mm

Operating Temperature 0℃ to 70℃

Operating Humidity 10% to 85% RH (no condensation)

Storage Temperature -10℃ to +80℃

Storage Humidity 5% to 90% RH (no condensation)

Power Supply DC 5V,3A

Power Consumption(Max) 8W

Splitter Unit Cert CE,FCC

Power Supply Cert CE,FCC
Note: Specification is subject to change without notice.

4.0 Package Content

 Main Unit

 5V DC Power Supply

 User Manual

5.0 Panel Description

6.0 Connection and Operation

 Connect the HDMI input source and output devices into the HDMI Amplifier

Splitter.

 Insert the DC side of 5v power supply into the splitter and then connect the

AC side of the power supply into the wall outlet.

 Turn on the power.

Attention: Insert / Extract cable gently.

6.1 Connection Diagram

Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive
2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested
by post under the below mentioned manufacturer address.

Note:

If wrongly installed or improperly used in the living area, the device can cause interference in
radios and other electronic devices. Appropriate use is when the device, as far as feasible, is
operated with shielded connection cables (with network products in addition to category 5
shielded cables and higher). The device has been tested and falls within the limits of class A
computing equipment according to the requirements of EN 55022.

Warning:

This device conforms with test category A - it can cause radio interference in the living area; in
this case the operator may demand that appropriate measures are implemented and arise for
this reason. Declaration of conformity: The device fulfills the EMV requirements according to
EN 55022 for ITE and EN 55024 class A. Devices with external or integrated power supply
furthermore fulfill the requirements of EN 61000-3-2 and EN 61000-3-3. In this way, the
fundamental protection requirements of the EMV-2014/30/EU guideline are fulfilled.

www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany