Digitus DS-42110 User manual

VIDEO SPLITTER

(DC-41110) (DC-42110) 1 In 2 Out 1 In 4 Out

(DC-43110) 1 In 8 Out

Introduction

Through the video splitter DC-41110 / DC-42110 / DC-43110 / DC-43115, you can use one PC to display identical image on 2,4,8,16 monitors or even more.

Video splitter is ideal for:

 Test bench facilities  Data Center  Help desk  Video broadcasting:

Presentation Stock quotes Timetables Educational facilities

Features

 With 400 MHz pixel frequency.  Extends the video signal up to 65 meter (213 feet).  Supports the DDC, DDC2, DDC2B. (For video out port

 Can be cascaded.  1U rack design for VS-8116PF.  The output is compatible with standard VGA card.

Specifications

Technical Specifications Input/Output Signal

Pin # Signal

1 Red video 9 NC 2 Green video 10 Ground 3 Blue video 11 ID0 4 ID2 12 ID1 5 Ground 13 Horizontal Sync 6 Analog Ground 14 Vertical Sync 7 Analog Ground 15 ID3 8 Analog Ground

Pin # Signal

FRONT VIEW

1. Power LED

REAR VIEW

(DC-43115) 1 In 16 Out

User Manual

(DC-41110 / DC-42110 / DC-43110 / DC-43115)

Package Contents-

 1 DC-41110 / DC-42110 / DC-43110 or DC-43115

Video S plitter

 1 user manual  1 power adapter DC 12V 600mA for DC-41110 /

DC-42110 / DC-43110 or 1 DC 12V 1.25A for

DC-43115  2 rack r ails, 8 screws for DC-43115 only Any thing missed, please contact with your vendor.

Function DC-41110 DC-42110 DC-43110 DC-43115

Video Input

Connector

(HD-15 Female)

Video Output

Connector (HD-15 Female) Max. Resolution 2048 x 1536 60 Hz Pixel Frequency 400 MHz

Cable Distance

(Device to

Monitor)

Signal Type VGA, SVGA, XGA, QXGA, UXGA, Multisync

Power Adapter

(Min.)

Housing Metal

Weight 420 g 455 g 680 g 1480 g

Dimensions

(LxWxH)

1 1 1 1

2 4 8 16

65 m (213 feet) Max.

DC 12V 600mA

130x75x42 mm

200x75

x42 mm

DC 12V

1.25A

343x105

x42 mm

-1-

1. Input Power Jack

2. “Video In” Port

3. “Video Out” Port *There are 2/4/8/16 out ports for DC-41110 /

DC-42110/ DC-43110 / DC-43115.

-2-

Installation

1. Turn off the PC and monito rs.

2. Connect the HD-15 video extension cable between the PC and the “video in” port of splitter.

3. Connect the HD-15 video extension cables between the monitors and the “video out” ports of splitter.

4. Connect the power cord and turn on the splitter.

5. Turn on the PC and monitors.

Note:

 If you install the DDC monitor for the splitter, the rest of

monitors must be the same resolution as the DDC monitor.

 Available monitors include the VGA, SVGA, XGA,

QXGA, UXGA, Multisync, and exclude the CGA, EGA, Mono.

Operation for cascade:

1. The function to display identical image on more monitors, you request to attach another splitter.

2. Connect the HD-15 male/male video extension cable between the “video out” port of the former splitter and the “video in” port of the latter splitter.

Note:

Even though you are allowed to cascade the splitter with varied ports, the image might become unst able if cascade too many tiers of splitters.

-3-

P.S.: The example cascades the 4 and 8 ports splitters; however, you can cascade the video splitter with demanded port.

Trademarks:

All the companies, brand names, and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companies.

-4-