Digitus DS-33221-1 operation manual

USB 2.0, 4+1 Port PCI Add-On card
User Manual
All brand names and trademarks are properties of their respective owners.
1
Features and Benefits
Compliant with USB specification revision 2.0
Backward compatible with USB 1.1 Specification
Hot-swapping feature allows you to connect/disconnect
devices without first turning system off
Supports high-speed (480Mbps), full-speed (12Mbps), and
low-speed (1.5Mbps) data transfer modes for simultaneous
operation of multiple USB 2.0/1.1 devices
Works with a various type of USB devices including hubs,
removable drives, digital cameras, scanner, CD-RWs,
DVD-ROMs, PC video cameras, printers, and more…
Four (4) external USB 2.0 ports
One (1) internal USB 2.0 port (Sharing with first external
USB port UJ1)
System Requirements
Windows® 2000/XP/2003/Vista/Windows 7
Available PCI slot
2
Hardware Description
Before installing the PCI VIA USB 2.0 Card, please see the photo
below highlighting the available USB ports of the card.
Note: The Internal Port (UJ5) shares with first External Port (UJ1).
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCI slot.
4.
To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly.
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
3
Driver Installation
For Windows® XP/2000
Windows® XP/2000 will automatically detect and install the
correct driver for the PCI VIA USB 2.0 Card.
However, please ensure you have the latest Service Pack
Installed.
For Windows® XP
Windows® XP Service Pack 1 or later
For Windows® 2000
Windows® 2000 Service Pack 4 or later
For Windows® Server 2003/Vista/Windows 7/10
Windows® Server 2003/Vista/Windows 7 has built-in driver
support for this controller. Just install the board and Windows
will automatically detect and install the correct drivers for it.
No additional driver is necessary.
4
To Verify Driver Installation
1. Right click My Computer, and then click Manage. Click Device Manager.
2. Double click Universal Serial Bus controllers option.
- USB Root Hub
(USB 2.0 Root Hub in Windows® 2000)
- USB Root Hub
- USB Root Hub
- VIA Rev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIA Rev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIA USB Enhanced Host Controller
5
Herby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
Par la présente, Assmann Electronic GmbH certifie que le produit contient la déclaration de conformité. Si la déclaration de conformité est manquante, vous pouvez la demander par post à l´adresse du fabricant ci-dessous:
www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany
6
Loading...