PCI Express FireWire
1394-A Card
User Manual
DS-30201-5
All brand names and trademarks are properties of their respective owners.
1
Features and Benefits
Compliant with 1394 Open HCI Specification
v1.0 and v1.1
Compliant with PCI Express Base Specification 1.1
Compliant with Physical Layer services as defined in
IEEE Std 1394a-2000
Supports PCI-Bus Power Management interface
Specification R1.1
Provides three cable ports at 100/200/400Mbps
32-bit DMA channels for physical memory read/write
External 2x1394a, 1x1394mini port (share port)
On-chip isochronous and asynchronous receive and
transmit FIFOs for packets(2K for general receive plus
2K for isochronous transmit plus 2K for asynchronous
transmit)
Package Content:
1 x PCI Express Card, Firewire 1394a (2+1 ports)
1 x Firewire 400 connection cable, 4pin/M - 6pin/M, 0.7m
1 x Low profile bracket
1 x Manual
2
Hardware Description
Bus Interface
PCI-Express x 1 Connector
2x 1394-A
1x 1394 mini
System Requirements
Windows 98se/me/2000/sever 2003/Vista/sever
2007/Win7/Win8/Win10/Mac
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s
cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus
connector with the selected PCIe slot on the
motherboard. Push the board down firmly.
5. Connect the system power source to the board’s power
connector.
6. Replace the slot bracket’s holding screw to secure the
card.
7. Replace the computer cover and reconnect the power
cord.
3
Driver Installation
No driver is required for this product.
Windows® 2000/XP/2003/Vista /Win7/Win8/Win10
will automatically detect and install the correct driver
for the FireWire 3-Port PCI Card.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity
is part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address.
Par la présente, Assmann Electronic GmbH certifie que le produit contient la
déclaration de conformité. Si la déclaration de conformité est manquante, vous
pouvez la demander par post à l´adresse du fabricant ci-dessous:
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
4
Loading...