
8-Port PoE Gigabit rack mountable Switch
+ 1x SFP Uplink
Manual
DN-95341
Products Description:
The DIGITUS 8-Port Gigabit Rack mount Switch with eight Power over Ethernet ports
and one additional SFP Fiber Port, offers your network significant improvement in
terms of performance and efficiency. Thanks to PoE support, you only need a single
(network) cable for power and data transfer. This switch makes it much easier to
connect devices such as access points, network cameras, and IP telephones, and
requires far less cabling than alternatives. It also allows you to extend your network
in places where there are no power supply cables or sockets available. The switch
does not require any configuration and therefore guarantees quick and seamless
integration into the network. Moreover, the switch has a rack mountable design and
can be easily installed with many standard racks, which makes this device the perfect
solution for data center and local server rooms.

Product Features:
8-Port 10/100/1000 Mbps PoE Gigabit rack mountable Switch + 1x SFP Uplink
Ethernet IEEE802.3 / 802.3u / 802.3x/802.3ab/802.3z / IEEE802.3 af/at
Power over Ethernet (PoE) - You only need one cable for power and data transfer
PoE power budget: 144 Watts (one to eight ports)
Supports PoE: Provides 8 PoE Port, each port output 30W max power
No configuration necessary
Maximum power output: 150 Watts
Status LEDs on each port
Pin Feet: V+ (RJ45 Pin 1, 2) V- (RJ45 Pin 3, 6)
Circuit isolation protection
Backplane: 18Gbps
MAC address table: 4K
1U Rack Design
Internal power supply
Dimensions (L x W x H): 350 mm x 210 mm x 54 mm
Weight: 1640g
Color: Black

Package Content:
8-Port Gigabit Switch
Manual
Power cable
Mounting Accessories
Hardware Description:
The Front Panel
The front panel consists of LED Indications.
LED Indicators
Per Device: Power
Per Port: LINK/ACT (Link/Activity)
Per PoE Port: PoE
The Real Panel
The rear panel view of the PoE switch consists of an AC power connector.

RJ-45 Ports ( Auto MDI/MDIX)
8 auto-sensing ports of 10Base-T, 100Base-TX or 1000Base-TX connections.
All ports can support Power over Ethernet to power devices.
Remark: MDI means connecting to another Hub or Switch while MDIX means
connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you can
connect to another Switch or workstation without changing pin-to-pin or crossover
cabling.
AC Power Connector
Plug the female connector into the switch and male connector into a power
outlet. Supports input voltages 100-240VAC, 50/60Hz.
Product Specifications:
Item Description
Summarize
Fixed port 8 x 10/100/1000Base-TX ports.
1 x 1000M SFP ports.
LED Indicators PWR, PoE, Link/Act LED.
Input voltage
100V~240V AC,50/60Hz
Network Standard IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX,
IEEE 802.3x Flow Control,
IEEE 802.3az
Network Media 10BASE-TX: UTP category 5, 5e cable (≤250m)
100BASE-TX: UTP category 5, 5e cable (≤150m)
1000BASE-TX: UTP category 5, 5e cable (≤150m)
Uplink Fiber Port: Single Fiber 20KM, Double Fiber: 20Km
Power Supplies 150W
Operating
temperature
0℃~40℃
Storage temperature
-10℃~70℃
Relative humidity
20%~85% (non-condensing).
Thermal methods Integrated Fan (25dB)
Switching capacity 18G.

MAC address table 4K.
Traffic control IEEE 802.3x full-duplex flow control.
Weight <3.5KG
PoE
PoE port 4/8 10/100/1000Base-TX ports.
PoE Standard IEEE802.3af, IEEE802.3at, per port 30W(MAX),
Total 150W.
Pin assignment V+ (RJ45 Pin 1, 2), V- (RJ45 Pin 3, 6).
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive
2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested
by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living
environment. In this case, the user can be requested to undertake appropriate measures to
prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany