Page 1
5 RJ-45 10/100M ports
PoE switch
with power adapter
Manual
DN-95320
Page 2
Product Description:
The DN-95320 is a 5 ports Power-over-Ethernet (PoE) switch. It provides 5
10/100Mbps Auto-Negotiation RJ45 ports and 4 ports with PoE function (Port 2-5).
The PoE ports can automatically detect and supply power for the IEEE802.3af/at
compliant Powered Devices (PDs), like Voip Phone, PoE APs, IP Phones, IP cameras,
etc.
The DN-95320 is a small size metal-shell device which is useful for the small office,
home and the IP solution project using. All PoE ports support both IEEE802.3af and
IEEE802.3at Standard; each port can output 30W max.
Product Features:
• IEEE802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE802.3af, IEEE802.3at
• Provides 5 10/100Base-TX ports
• 4 PoE Ports (Ports 2-5), Each PoE port output 30W max power
• High back-plane bandwidth 1Gbps
• Reliable Power Adapter supply power for both network switch and PoE
• 1K entry MAC address table of the PoE switch with auto-learning and auto-aging
• IEEE802.3x Flow control for Full-duplex Mode and backpressure for Half-duplex
Mode
• Surge protection for power port and data ports
• Supports PoE IEEE 802.3af or IEEE802.3at compliant Powered Device (PD)
• Compact metal case for desktop or wall-mounting
• EMI standards complies with FCC, CE class A
Page 3
Package Content:
PoE Switch (DN-95320)
DC Power adapter
Power Cable
User Manual
Hardware Description:
The front panel
The front panel consists of LED Indications and RJ45 connector
LED Indicator
Per Device: Power
Per Port: LINK / ACT (Link/ Activity)
Per PoE Port: PoE
Page 4
The Real Panel
The rear Panel view of the PoE switch consists of a DC power connector
DC Power Connector
Plug the female connector into the switch and male connector into a power outlet.
Support input voltages 44~57 VDC
Product Specifications:
Item Description
Summarize
Fixed port 5 10/100Mbps RJ45 port
PoE Port 4 PoE ports (Port 2-5)
LED Indicators PWR, PoE, Link/Act LED
Input voltage 100V～240V AC，50/60Hz (for power adapter)
48VDC (for switch)
Network Media 10BASE-TX: UTP category 5, 5e cable (≤250m)
100BASE-TX: UTP category 5, 5e cable (≤150m)
Forwarding Rate 10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Power Supplies 65W
Operating temperature
0℃～40℃
Storage temperature
-10℃～70℃
Relative humidity 20%～85% (non-condensing)
Thermal methods Fanless
Switching capacity 1G.
MAC address table 1K.
Traffic control IEEE 802.3x full-duplex flow control
Package Size 18.5*14*7 cm
Weight 0.85Kg
PoE
PoE port 4 10/100Base-TX ports.
PoE Standard IEEE802.3af, IEEE802.3at, per port 15.4W,max
30W
Pin assignment V+ (RJ45 Pin 3, 6), V- (RJ45 Pin 1, 2)
Page 5
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive
2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested
by post under the below mentioned manufacturer address.
Note:
If wrongly installed or improperly used in the living area, the device can cause interference in
radios and other electronic devices. Appropriate use is when the device, as far as feasible, is
operated with shielded connection cables (with network products in addition to category 5
shielded cables and higher). The device has been tested and falls within the limits of class A
computing equipment according to the requirements of EN 55022.
Warning:
This device conforms with test category A - it can cause radio interference in the living area; in
this case the operator may demand that appropriate measures are implemented and arise for
this reason. Declaration of conformity: The device fulfills the EMV requirements according to
EN 55022 for ITE and EN 55024 class A. Devices with external or integrated power supply
furthermore fulfill the requirements of EN 61000-3-2 and EN 61000-3-3. In this way, the
fundamental protection requirements of the EMV-2014/30/EU guideline are fulfilled.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Loading...