Digitus DN-95206 operation manual

Gigabit PoE++ Splitter, 802.3bt

Manual

DN-95206

Introduction

The DIGITUS Gigabit PoE Splitter delivers data and power via a single
network cable to devices that do support Power over Ethernet. To
deliver power and data, simply connect the input side of the splitter to a
PoE switch or a PoE injector and the output side to a non-PoE
compatible network device such as an access point, IP phone or IP
camera. The splitter is powered by PoE (Power over Ethernet), therefore,
you do not need an additional power supply unit and can use the device
even where there are no power lines or power outlets. The output
voltage is 12V and is provided via a terminal block. The splitter requires
no configuration and thus guarantees a fast and seamless integration
into your network.

Data: DN-95206 it works well during 40VDC-57VDC together with PoE
injector. And the effective distance is 100met

1. DC power output connector

2. PoE power input indicator LED

3. Load active indicator LED

4. LAN data output RJ45 port

5. PoE input RJ45 port

6. Mounting hole

7. Mounting hole

Key Features

- Output power: 85W, for most high power load device.

- Output current: 7.0A

- Power Pins: 4/5(+), 7/8(-) & 3/6(+), 1/2(-)

- Metal shell with 4 mounting holes, easy to install

- Support IEEE802.3af/at/bt standard

Package Content

1x Gigabit PoE Splitter
1x Manual
1x Terminal Block