Page 1
GIGABIT PoE+ EXTENDER
Manual
DN-95123
Description
Ethernet and PoE connections both restrict cable distances to 100 meters between
network ports. To overcome this distance limit, network installers can simply connect
a PoE Extender in-line with the Cat-5e or Cat-6 cable.
With PoE Extender, PDs (such as IP Security Cameras, VoIP telephones, and wireless
access points) can be installed at greater distances than 100 meters from another. By
connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE
can be extended to 200 meters, 300 meters, or even greater distances, depending on
PDs power required and power source.
PoE Extender does not require any additional power supply and the connected PDs is
fed by a single PoE switch or mid-span, which simplifies installation. PoE Extender
offers two Ethernet ports, which are both configured automatically for link speed,
duplex and crossover and the full-rate network throughput is main-tained.
Page 2
Features
• Compatible with IEEE802.3af and IEEE802.3at
• Extends the range of PoE and Ethernet an additional 100 meters
• No additional power supply is required
• Automatically detects and protects PoE equipments from being damaged by
incorrect installation
• Full-rate network throughout the whole extended distance
• Compact size, Wall-Mountable design
• Easy plug-and-play installation
• EMI standards complies with FCC, CE class B
Specifications
Item Description
No. of channels 1
Pass Through Data Rates 10/100/1000 Mbps half/full duplex
Power over Ethernet input Pin Assignment and Polarity:
Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)
Power over Ethernet Output Pin Assignment and Polarity:
1/2 (-), 3/6 (+)
Output Power: up to 22W
Indicators LED indicators are located on the RJ45 connector
Power indicator: PoE enabled
Network indicator:
Connectors Shielded RJ-45, EIA 568A and 568B
Network cables Shielded category 5 (or higher)
Dimensions 145mm x 60mm x 40mm
Mounting Wall of shelf
Environment Indoor
Environmental Conditions Operating Ambient Temperature: -10 to 45°C
Operating Humidity:
Maximum 90%, Non-condensing
Storage Temperature: -20 to 70°C
Storage Humidity:
Maximum 95%, Non-condensing
Regulatory Compliance IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
RoHS Compliant, CE, FCC
Electromagnetic FCC Part15, Class B
Page 3
Application
Maximum Distances for Power Sources
Multiple PoE Extenders can be connected every 100 meters to obtain greater
distances. The actual figures depend on operating conditions. The range is over 24
AWG or heavier Cat-5e or Cat-6 cable except where specified.
Examples for low power PoE Devices (that are PoE Class 1, or require under 4 watts)
PoE Source
PoE switch
(802.3af)
15W mid-span
(802.3af)
PoE+ switch
(802.3at)
30W mid-span
(802.3at)
Maximum Distances
400m 400m 500m 500m
Examples for medium power PoE Devices (that are PoE Class 2, or require under 6
watts)
PoE Source
PoE switch
(802.3af)
15W mid-span
(802.3af)
PoE+ switch
(802.3at)
30W mid-span
(802.3at)
Maximum Distances
300m 300m 400m 400m
Switch
Midspan
PoE extender
Camera
Max 100 m
Max 100 m (328 ft.)
Page 4
Examples for full power PoE Devices (that are PoE Class 0 or 3, or require under 12
watts)
PoE Source
PoE switch
(802.3af)
15W mid-span
(802.3af)
PoE+ switch
(802.3at)
30W mid-span
(802.3at)
Maximum Distances
200m 200m 300m 300m
Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts, or 802.3at
compliant)
PoE Source
PoE switch
(802.3af)
15W mid-span
(802.3af)
PoE+ switch
(802.3at)
30W mid-span
(802.3at)
Maximum Distances
Not applicable Not applicable 200m 200m
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive
2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be
requested by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In this
case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Loading...