Page 1
5-port PoE Extender
3-port Fast Ethernet Switch
+ 1-port PD
+ 1-port PSE
(IEEE 802.3af standard)
User’s Manual
DN-95121
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device
and pursuant to Part 15 of FCC Rules.
These limits are designed to provide a
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates and radiates radio frequency
energy. If it’s not installed and used in
accordance with the user’s manual, it may
cause interference. In which case, users will
be required to correct interference at their
own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
Extending a distance to another 100M per
extender and cascading for a longer distance.
This PoE extender provides 3-port 10/100M
switch, 1-port 10/100M PD input ports and
1-port 10/100M PSE output ports with 48V
which is compliant with IEEE 802.3af
standard. It can extend the distance via Cat.
5/5e/6 cable without any special equipment.
The PD port can be connected via Cat. 5/5e/6
cable to other PSE/PoE and get the power
source from other PSE port through Cat.
5/5e/6 cable. The PSE/PoE port can be
connected to other PD via Cat. 5/5e/6 cable
and extend a distance to another 100M
through this device. It is designed for easy
installation and high performance to an
environment where the traffic is on the
network and the number of users is increased
continuously.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
One 5-port PoE Extender
One User ’s Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
5-port PoE Extender: 3-port 10/100M
switch, 1-port 10/100M PD (Data+Power in)
and 1-port PSE (Data+Power out) which is
compliant with IEEE 802.3BaseT, IEEE
802.3uBaseTx and IEEE 802.3af standard.
1-port 10/100M (Data+Power in) is IEEE
802.3af Powered Device (PD) getting power
source from other PSE
1-port (Data+Power out) is IEEE 802.3af
Power Sourcing Equipment (PSE) providing
power source to other PD
Palm size with metal case
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Auto-MDI/MDI-X function for any port
Smart plug & play
Front Panel (LEDs)
LED Indicator of 5-port PoE Extender
LED Status Description
PSE On Port is connected
Off No connection.
Power On Power is on.
Off Power is off.
LINK/ACT On Port is connected
Off No connection.
Flashing Data is transmitting or
receiving
5-port PoE Extender
Rear Panel (Connections)
Switch/PC/PSE/PD to 5-port PoE
Extender
Port 1 PSE
(Providing Power to other PD)
Port 5 PD
(Getting Power Source)
This PoE extender provides automatic
crossover detection functionality. It is simple
and friendly to up-link to another device
without crossover cable.
Via a twisted pair cable straight through, this
PoE extender can be connected to PCs,
servers and other PSE/PD.
5-port PoE Extende
r
User Manual
PoE Extende
r
PSE
(PoE Injector / Switch)
PC
MAC
Serve
r
Page 2
Technical Specifications
Standards
IEEE 802.3af
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control
Features
Number of Ports:
3 x10/100BaseTX Switch +
1 x PD (Data+Power in)+
1 x PSE (Data+Power out)
MAC Address: 1K
Buffer Memory: 96K Bytes
Method: Store and Forward
Filtering/
Forwarding
Rates
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission
Media
Cat. 5/5e/6 UTP/STP
LED
Indicators
Power: PD Link
Port 5: PD Link/Act
Port 2~4: Link/Act
PSE Status: Link
Port 1: PSE Link/Act
Power Output/Input
1-port 48V/DC Input/Output
Power
Consumption
6 Watts (Max)
Dimensions
130 × 77 × 24mm (L x W x H)
Weight 0.2 kg
Operating
Temperature
0 to 45°C
Storage
Temperature
-20 to 90°C
Humidity
10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE
Power and Extend distance
Power is supplied through Cat. 5/5e/6 cable
from other PSE and extend a distance to
another 100M through this device.
PoE Access Point PoE Extender PoE Extender
PoE IP Camera PoE Extender PoE Switch / PoE Injector
PoE Splitter PoE Extender
Non-PoE IP Camera
Loading...