Digitus DN-82010-1, DN-82021-1, DN-82020-1 User Manual

10/100Base-TX to 100Base-FX
Media Converter
User’s Manual
1. Overview
IEEE802.3u Ethernet supports two types media for network connection
is designed with a switch controller and buffer memory that connects
two types segments operation smoothly. This converter can be used as
standalone unit or as slide-in module to the 483mm (19”) converter rack
Chassis for use at a central wiring closet.
2. Check List
Before you start installing the Converter, verify that the package
contains the following:
- The TP-Fiber Converter
- AC-DC Power Adapter (for external models) or Power Cord
(for internal models)
- The User’s Manual
Please notify your local sales distributor immediately if any of
the mentioned items is missing or damaged.
3. Technical Specifications
Standards
IEEE802.3, IEEE802.3U, 10/100Base-TX, 100Base-FX
Media Supported
10Base-T: Cat. 3, 4, 5 UTP/STP, max 100m 100Base-TX: Cat5 UTP/STP, max 100m Multimode fiber model: (50/125µm, 62.5/125µm) Singlemode fiber model: (9/125µm)
TP Connector SC/ST/FC
Referenced Transmission Distance
Dual-fiber multimode: 2km Dual-fiber singlemode: 20/40/60/80/l 00/120km Single-fiber singlemode: WDM 20/40/60/80km
Data Forward Rate 10Mbps / 100Mbps
Flow Control
IEEE802.3x flow control for full-duplex model Back-pressure flow control for half-duplex mode
Power Supply 5VDC or 110~260VAC or 48VDC
Power consumption
2.5W
Operation Temperature 0 to 55
Relative Humidity 5% to 80% (non-condensation)
Feature
1. Built in 2-port switch:
- Supports modified cut-through frame forwarding for low latency
- Supports pure converter mode data forwarding for extreme low latency
- Supports flow control for full and halt duplex operation
- Bandwidth control
- Forward 1600 bytes packet for management
2. Supports 100Base-FX standard
3. Built in 128KB RAM for data buffer
4. Supports Auto MDI-MDIX function
5. Supports link fault pass through function (LFP)
6. LED display for link/activity, full/half, 10/100M
Loading...
+ 4 hidden pages