Digitus DN-7062 User Manual

EASY WEASELTM MOBILITY

3G | 4G | LTE ACCESSPOINT & TRAVEL ROUTER

User Manual

DN-7062

IMPORTANT USAGE INSTRUCTION

For the convenience of use, this product accepts power from a desktop or a
laptop computer. It’s mandatory to connect both of two USB connectors at one
end of USB supplied power cable to computer at one time. Power supply is not
sufficient for the device to operate normally if only one USB connector is inserted
into the computer. In this scenario it might cause temporary malfunction on the
computer.

2

Copyright

The contents of this publication may not be reproduced in any part or as a whole,
stored, transcribed in an information retrieval system, translated into any
language, or transmitted in any form or by any means, mechanical, magnetic,
electronic, optical, photocopying, manual, or otherwise, without the prior written
permission.

Trademarks

All products, company, brand names are trademarks or registered trademarks of
their respective companies. They are used for identification purpose only.
Specifications are subject to be changed without prior notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against radio interference in a commercial
environment. This equipment can generate, use and radiate radio frequency
energy and, if not installed and used in accordance with the instructions in this
manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause interference, in which case
the user, at his own expense, will be required to take whatever measures are
necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55022/A1 Class B.

3

Table of contents

CHAPTER 1

INTRODUCTION ....................................................................................................................... 5

1.1 PACKAGE LIST ........................................................................................................... 5

1.2 HARDWARE INSTALLATION ..................................................................................... 6

CHAPTER 2

GETTING START ...................................................................................................................... 9

2.1 EASY SETUP UTILITY BY EASY SETUP .................................................................. 9

2.2 EASY SETUP BY CONFIGURING WEB PAGES ..................................................... 14

CHAPTER 3

MAKING CONFIGURATION ................................................................................................... 18

3.1 ADVANCED ................................................................................................................ 18

3.1.1 BASIC SETTING .................................................................................................... 18

3.1.2 SECURITY SETTING ............................................................................................. 27

3.1.3 ADVANCED SETTINGS ........................................................................................ 32

3.1.4 TOOL BOX ............................................................................................................. 34

CHAPTER 4

TROUBLESHOOTING ............................................................................................................ 37

APPENDIX A SPEC SUMMARY TABLE ............................................................................... 40

APPENDIX B LICENSING INFORMATION ........................................................................... 41

4

Chapter 1 Introduction

Congratulations on your purchase of this outstanding Product ：Wi-Fi Mobile
Router. This product is specifically designed for mobile user who needs to have
the internet access beyond his home and office. It provides a complete solution
for Internet surfing and broadband sharing. Instructions for installing and
configuring this product can be found in this manual. Before you install and use
this product, please read this manual carefully for fully exploiting the functions of
this product.

1.1 Package List

Items Description Contents Quantity

1 WiFi Mobile Router 1

2 USB Cable

(Only for Power use)

3 Power adapter 1

4 CD 1

1

5

1.2 Hardware Installation

Hardware configuration

USB

Wireless & USB LED

Hook

WPS
Power Switch
Power

Hook assembling or dissembling

PUSH

“Click”
sound

6

LED indicators

LED color Description

USB LED

Wi-Fi LED

Blue
Blue
Blue

Blue

in flash

in flash

3G/3.5/4G is on
Data access
WLAN is ON

Data access

Blue in fast flash Device is in WPS Mode

Installation Steps

DO NOT

Step 1.

Turn off the power switch and then plug USB Modem
to the Router.

Step 2.

Plug your USB modem which is with activated USB
dongle.

switch on WiFi Mobile Router before performing the installation steps below.

Step 3.

You can choose either Power Adapter or USB Cable
for power supply.

3.1. Use Power Adapter
Connect with the power adapter to the receptor
on the back panel of it.

3.2. Use USB cable
Connect USB Cable to the same place of it.

7

Step 4.

4.1. Use Power Adapter
Then plug the other end of the power adapter into
a wall outlet.

4.2. Use USB Cable
Then plug the other end of USB Cable to USB
Port on your PC or NB.

Step 5.

Turn on the power switch.

The Wi-Fi and 3G LED will turn ON to
indicate that the power has been applied.

8

Chapter 2 Getting start

2.1 Easy Setup Utility by Easy Setup

We provide Wizard and Easy Setup by Windows Utility to enable you to set up the WiFi Mobile
Router quickly and easily.

Check the steps below before running the section.

(1) Press WPS button more than 6 seconds on the Router. The Router will reset to default.
(2) Connect to the Router by Wi-Fi. The default SSID is the same as “Mac Address”
(3) Insert CD to CDROM; Click the Easy Setup Utility from CD or Auto Run.

Easy Setup by Utility- Wizard

Step 1.

You can start to configure the
device via the Easy Setup Utility

Step 2.

Select Language then click
“Next” to continue.

9

Step 3.

1. Please select Wizard mode
to run the setup step-by-step
to diagnose the network
settings of the Router.

2. Click the “Wizard” button and
click “NEXT” to continue.

Step 4.

1. Make sure your USB
Modem is connected to the
USB port of the Router.

2. Make sure the Router is
powered on.

3. Make sure your computer
has connected to the Router.

4. Make sure your computer
has an IP address.

5.

Click “Next” to continue.

Step 5.

1. Key in the SSID, Channel
and Security options, for
example: SSID: “Wi-Fi
Mobile Router”, Security:
WEP
Key: “1234567890”.

Default SSID is the same as
“Mac Address”

2. And then click “Next” to
continue.

10

Step 6-1.

Select “Auto-Detection”, and
the Utility will try to detect and
configure the required 3G
service settings automatically.

Click “Next” to continue.

※ Default PIN Code is empty,
if you have PIN Code, you must
enter it. For example “0000”. If
no, just Click “Next” to continue.

Step 6-2.

Or you can select “Manual” and
manually fill in the required 3G
service settings provided by
your ISP.

Click “Next” to continue.

Step 7.

Check the settings, and then
click the “Next” if the settings
are correct.

11

Step 8.

The Wi-Fi Mobile Router is
rebooting to make your entire
configuration activated.

Step 9.

Please reconnect to Router
before click “Next”.

Step 10-1.

Click “Next” to test the Internet
connection or you can skip test.
And then click “Next” to
continue.

12

Step 10-2.

Test the Internet connection

Step 11.

Congratulations!
Setup is completed.
Now you have already
connected to Internet
successfully.

13