Digitus DN-19 20-U User Manual

✔ 1.5 mm strong steel sheet

✔ Load capacity up to 100 kg

✔ Standard colors grey and black

✔ Large range of equipment available

482.6 mm (19”) Wall Mounting Cabinet Unique Series

Abstract

482.6 mm (19”) wall mounting cabinet Unique Series, 600 mm width - 450 mm, 600 mm depth

Features

- Safety class rating IP20

- Front door made out of lateral metal struts with safety glass, 1-point-locking

- Door stop is easy to change

- 210° door opening angle

- Side panels are lockable and removable

- 482.6 mm (19“) profile rails mounted on the front side inside of the cabinet, galvanized

- 600 mm depth cabinets with 482.6 mm (19”) profile rails on the front- and rear side

- 482.6 mm (19”) profile rails are adjustable in depth and with height unit marking

- Load capacity of 482.6 mm (19”) profile rails: 100 kg

- Max. equipment mounting depth: 370 mm (450 mm depth cabinets); 450 mm (600 mm depth cabinets)

- Cable entry on the rear side and base with plastic cover and top with sliding cover

- Roof is prepared for fan units (punched out entries)

- Ventilation slots for active and passive ventilation and exhausting

- Several earthing points for cabinet components

- Incl. installation set (screws, cage nuts, washers)

- Cabinet is completely mounted

Product Overview

The Wall Mounting Cabinets of the Unique Series were designed for the user friendly installation of active- and
passive network components accompanied by a neat cable management. Each cabinet consists of up to 1.5 mm
strong steel sheet material which ensures a very good stability due to a robust steel construction. The color is
created by powder coating. Wall installation can be done easily in two steps: Mount the rear panel on your wall
and then simply connect it with the housing. Leveling feet or castors are available separately for free standing
purposes. Door and side panels are easy to detach and the door stop can be changed. The roof contains air
ventilation slots for a better air circulation. Each wall mounting cabinet contains one pair (two pieces) of
mounted 482.6 mm (19”) profile rails inside (wall mounting cabinets from 600 mm depth contain two pairs).
They are galvanized, with height unit marking (countable from both directions) and variable in depth.
An important aspect for each installation is the cable management. The roof of each cabinet is equipped with
a sliding cable entry panel with rubber sealing. Punched out cable entries with plastic cover are present on the
rear wall and base. An extensive portfolio of accessories for cable management, shelves, etc. will help to meet
many requirements in daily use.

Conform due to standards

- ISO 9001:2008

- IEC 297-1, -2 (dimensions of mechanical structures of 482.6 mm (19“) series)

- EN 61587-1:2012 (mechanical carrier for electric systems)

- EN 60950-1:2006 (CE information technological systems - safety - part 1 - general requirements)

Product Images

Logistic Information

Height units (U)

Height in mm

Width x Depth in mm

Net weight in kg

7U

420 mm
600x450 mm

17 kg

600x600 mm

19 kg

9U

509 mm
600x450 mm

20 kg

600x600 mm

23 kg

12U

643 mm
600x450 mm

25 kg

600x600 mm

30 kg

16U

820 mm
600x450 mm

31 kg

600x600 mm

37 kg

20U

998 mm
600x450 mm

35 kg

600x600 mm

40 kg