Digitus DA-90387 Service Manual

Electric Height-Adjustable

Variable Stand / Sit Desk Frame

USER MANUAL

DA-90387

Rated Voltage: 100-240v

Continuous Working 2 Minutes, rest at least 18 minutes.

CAUTION / INFORMATION

IMPORTANT: Please read this manual carefully

1. This height adjustable desk has electric motors and is

designed for use in dry work areas only.

2. Make sure no obstacles are in the desk’s path.

Make sure the desktop is not touching any walls.

Make sure all cords are appropriate length to accommodate

the change in height.

3. Do not sit or stand on the desk frame.

Do not crawl or lie under the desk frame.

4. Do not place any objects taller than 20” underneath the desk.

5. Do not open any of the components – the legs, control box or

switch.

6. Make sure that the power supply is between 110V and 240V

before plugging the control box into it.

7. This product is designed with a duty cycle of 10%

(2 min. on, 18 min. off).

8. Under no circumstances does the manufacturer accept

warranty claims or liability claims for damages caused from

improper use or handling of the desk frame.

Tools Required

Hexagonal Wrench 2.5mm, 4mm, 5mm

Screwdriver (Prepared Yourself)

Hardware

A. M6x20 (8)
B. M6x14 (18)
C. ST4.8x19 (10)
D. ST3.5x19 (3)
E. Desktop Gaskets (6)
F. Hexagonal Wrench 2.5mm
G. Hexagonal Wrench 4mm/ 5mm
H. Clips (4)
I. Adjustable Feet (4)
J. Control box (1)
K. Keypad (1)
L. Power Cord (1)

Part Diagram

No. Description Qty

1 Crossbar Assembly 1

2 Legs 2

3 Feet 2

4 Adjustable Foot 4

5 Transmission Bar 1

6 Desktop Bracket 2

7 Keypad 1

8 Controller 1

Installation Step

1. Loosen Crossbar.

Loosen the screw and adjust the length of the table to expose

the mounting holes on the side of the side.