Page 1
WEBCAM USB 2.0
User Manual
DA-71810
Page 2
1
Product Introduction
Thank you for using the new generation digital webcam.
This webcam works with a USB port to be connected with
PC. It is an ideal webcam for its plug and play and real-time
transmission. Its mini size, easily carrying, high resolution
and high speed make your life more colorful and make your
long distance communications fresh and vivid.
Technical Specification
* High Resolution CMOS Color Sensor
* Resolution: 300K Pixels (interpolated 30M)
* Video Format: 24bit True Color
* Interface: USB2.0, compatible with USB1.1
* Transmission Speed:
640*480 25frames/second
2560*1920 15frames/second
6324*4742 15frames/second
* Dynamic Range: ≥72db
* Imaging Distance: 5CM to infinity
* Built-in Image Compression
* Automatic White Balance
* Automatic Color Compensation
* Manual Snapshot (Snapshot button is necessary for this)
* With Microphone
Page 3
2
System Requirement
* IBM PC compatible computer or notebook with USB port
* Pentium200 or Higher CPU
* WIN XP/VISTA/7/ LINUX /MAC System
* Hard Drive Remaining Space≥20MB
* CD—ROM Drive
* Internal Storage≥32MB
* VGA Display Card Available for DIRECTX
Driver Installation (WINDOWS XP)
Connect webcam to PC. After hardware founded, put “CD
Driver” disk in the CD-Rom and an interface as below would
come out automatically.
Click “Next”
Page 4
3
Click “Install”
Click “Finish”
Page 5
4
Please restart your computer after installing the driver.
Click “USB 2.0 PC CAMERA” in the desktop and click
“Options” menu
In the setting option, you could choose your required output
size and capture size.
Dynamic maximum interpolation by software: 30Mega
Pixels (6324*4742), the following is:
4000*3000/3876*2584/2560*1920/2034*1728/2048*1536/
1600*1200/1280*1024/640*480/352*288/320*240/
176*144/160*120
Page 6
5
The save path for the default picture taken by software is in
“My Pictures” of “My Documents”, or you can change the
save path. Like below picture:
Special notice: the output of taking picture by hardware is
300K Pixels (640*480); short press snapshot button, you
can take pictures; Long press the button 3 seconds, then
short press the button is special effect function. Long press
the button 3 seconds again, then Short press the button is
snapshot function.
Page 7
6
Choosing “Frame Type, Letter Out and Mosaic Setting”
1. In “Frame Type”, choose your favorite special-effects
and click “OK”.
2. In “Letter Out”, could input words you like → click
“Apply Effect” → inputted words will bring out in “USB
2.0 PC CAMERA” video window → click “ok” to finish.
3. In “mosaic setting” of special-effects window, drag
“
” drop-down button → image will appear in
various shades of “mosaic” change. Mosaic setting
range: 0～24.
Page 8
7
4. Choose “options” menu → choose “Video Capture…”
option → “Properties” window comes out → in “Face
Page” to choose your favorite special-effects →
special-effects will show in “USB 2.0 PC CAMERA”
window → click “OK”.
5. “shortcut”
In the lower right corner of the desktop,
Page 9
8
there is a shortcut icon “ ”, right click this icon,
you could set up special effect/ frequency.
Notice:
Don’t use fingers or any other sharp or coarse items to
touch the camera. Soft cotton cloth is highly
recommended to clean the optics parts.
Don’t use this product when ambience is too hot or cold
or dusty.
Please avoid this product dropping heavily. Heavily
dropping will cause it not to work well.
Loading...