Digitus DA-71035 operation manual

USB 3.0

External HDD Enclosure 3.5" (8,89cm)

User Manual

DA-71035

Foreword

Congratulations on your purchase of our product! We will show you a new storage concept with safety

and convenience, It is our pleasure to give you the best solution to expand your HDD`s Capacity and

enhance your data`s reliability in PC system or Mac system. Before using the product, please read this

manual carefully for further recognizing of the product.

I. System Requirement

Hardware requirement: a PC or Notebook with free USB interface

Operation system: Windows 7/Vista/XP/2000

II. Feature

• Screwless design, easy install or remove disk drive

• Suitable for 3.5” (8,89cm) SATA HDD

• Compliant with USB 3.0 to SATA interface

• Transfer rate max up to 5Gb/s

• Backwards compatibility with USB 2.0, supports High-Speed (480Mbps)

• One touch backup function

• Support Hot-Plugging, and Plug & Play compatible

• Power Supply: AC100~240V input, DC 12V/2A output

III. Package content

Before using the product, please check the contents in the package as follows.

If it is not correct, please contact the local dealers timely.

• USB 3.0 External HDD Enclosure, 3.5 inches (8,89cm)

• Power adapter 12V/2A

• Product supported CD (Multi-language User Manual)

• User Manual

• USB 3.0 connection cable

IV. Hardware Install

1. Slide the button to [OPEN] position,

2. Slide the top cover to the direction of USB socket

3. Remove the top cover

4. Connect the 3.5" (8,89cm) SATA HDD to the 22pin SATA connector at the rear of the HDD firmly

5. Push the HDD into the enclosure slowly and carefully

6. Slide the top cover to the main case

7. Slide the button to the [CLOSE] position

8. Insert the enclosure to the attached stand

9. Connect the USB 2.0 connection cable to enclosure and PC

10. Connect the power adapter to the enclosure and power source