Page 1
4K HDMI HDCP Converter
Manual
DA-70471
The Digitus HDMI HDCP Converter solves HDMI signal
transmission problems when the signal source and the
output device use different HDCP versions. It enables
a bidirectional conversion of the HDCP version
(1.4 to 2.2 or 2.2 to 1.4). The power is supplied via an
included micro USB cable.
Page 2
Features
HDCP v2.2 to v1.4 Conversion
HDCP v1.4 to v2.2 Conversion
Easy to read LEDs
HDMI 2.0 18G pass-through up to 4k 60Hz 4:4:4 8bit
Provides HDMI Jitter Cleaning on the signal path
Package Contents
Bidirectional HDCP Converter
USB Micro-B Cable, 0.70m
Manual
Page 3
Operation
The Bidirectional HDCP Converter will convert either
HDCP v1.4 to HDCP v2.2 or HDCP v2.2 to v1.4. If both
devices have the same HDCP version then the unit will
operate in a pass through mode.
To use simply connect a HDMI cable from your source
to the input and a HDMI cable from the output to the
display. A USB Micro-B port is provided if your source
does not provide enough power.
LEDs indicate the input and output HDCP version, Red
LED – v1.4, Blue LED - v2.2. No LEDs indicate that no
HDCP is present on the source.
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Loading...