Digitus DA-70466 Service Manual

HDMI EDID Emulator

Manual

DA-70466

The Digitus 4K HDMI EDID Emulator continuously emulates a connected HDMI
monitor so that the signal source does not change or disconnect your signal
even when the connection is interrupted. It has preset EDID data
(resolutions/timings), which can be found in the user manual. If EDID data of an
individual monitor/display are missing, they can be read and cloned quickly and
easily by means of the practical clone function. The emulator supports
resolutions up to UHD 4K2K/60 Hz. The emulator offers the ideal solution for
applications with HDMI extenders, splitters, switches or converters.

Package Contents

• 4K HDMI EDID Emulator

• Manual

Application

PC Monitor EDID EDID Emulator

Backup Mode Turn ON:

Connect to PC with Male port. Female port connect to Monitor/TV and un-plug
one time. The emulator will turn on Backup Mode, and the emulator LED start
flash.

PC Emulator Monitor/TV

Plug-in and remove one time

PC Emulator (LED Flash)

Backup Mode Turn ON

When Backup Mode be Turn ON. There are 2 modes to select:

A. Emulator copy sink Monitor EDID
When Backup Mode is Turn ON (LED Flash), Connect the Monitor/TV to

Emulator Female Port, the emulator EDID will copy the Monitor/TV EDID.

B. Recovery Emulator EDID
When Backup Mode is Turn ON, and the emulator female port keep empty
during 10 sec, EDID in Emulator will recovery to factory setting.

EDID Recovery to Factory setting:

Fellow operation B: Turn ON the Backup Mode (LED Flash), emulator Female
port keep empty and wait 10 set. The emulator EDID data will recovery to
factory setting.