Card Reader All-in-one, USB 3.0
Quick Installation Guide
DA-70330-1
The DIGITUS USB 3.0 "All-in-One" card reader enables you to transfer your digital
content to a PC or Mac in a very fast and easy way. The product gives you the ability
to use nearly every type of memory card.
Product Function:
1. Read and write SD, miniSD, CF, MS, XD, M2, MicroSD Card (TransFlash)
2. Support Hi-speed cards SDXC, MS etc.
3. Supports two cards at the same time
Specification & Features:
1. Compliant with USB3.0 down compatible with USB2.0/1.1
2. Support the following speed rate:
Low-speed (1.5Mbps)/Full-speed (12Mbps)/High-speed (480Mbps)/Super-speed
(5Gbps)
3. Support Extended Capacity SD Memory Card (SDXC): more than 32GB and up
to 2TB
4. Support MSPRO-HC Duo8-bit mode
5. Support SDHC memory card
6. Support MSXC memory card
7. Support CFV4.1 WITH PIO mode 0-6, Multi-word DMA mode 0-4 and Ultra DMA
mode 0-6
8. Support CF v5.0 with LBA48 (draft spec., not final)
9. Support Windows 2000/XP/Vista/7/8/10, Mac 10.x
Package Content:
Card Reader
USB 3.0 connection cable, A/M - A/M, 1.0 m
User manual
Product Image:
Front Back
Application:
Application
Dual Channel
Data transfer
Speed up
Data transfer
Card Reader
Computer
Notes:
1. Operating Temperature: 0-70°C Operating humidity: 10%-85%
2. Storage Temperature: 0-85°C Storage humidity: 5%-90%
3. Product size: 85.5x43x13.8 MM
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements
of Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete
declaration of conformity can be requested by post under the below mentioned manufacturer
address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living
environment. In this case, the user can be requested to undertake appropriate measures to prevent
interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Loading...