Digitus DA-70327 operation manual

USB 3.1 Type C - SATA 3 adapter cable for 2.5"

SSDs/HDDs

Quick Installation Guide

DA-70327

Description

This converter can be connected via USB Type-C™ interface to a PC or laptop. Therefore,
different SATA devices with 22 pin SATA interface can be operated.

Specification

 Connector:

1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ male
1 x SATA 6 Gb/s 22 pin male
1 x DC jack

 Chipset: Asmedia ASM1351
 For SATA HDD, SATA SSD, optical drive etc.
 Supports SATA 1.5 Gb/s, SATA 3 Gb/s and SATA 6 Gb/s
 Support Max. Capacity of SSD/HDD to 5TB

 Data transfer rate up to:

SuperSpeed USB 10 Gbps
Hi-Speed 480 Mbps
Full-Speed 12 Mbps
Low-Speed 1.5 Mbps
SATA 6 Gbps

 LED indicator
 Plug & Play
 Length incl. connector: ca. 35cm

System requirements

Windows Vista/7/8/8.1/10.
Mac OS X 10.11, Linux Kernel 3.19
Google Chrome OS
PC or laptop with a free USB Type-C™ port

Package content

 USB 3.1 Type C - SATA 3 adapter cable
 User manual

Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of
conformity can be requested by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living
environment. In this case, the user can be requested to undertake appropriate measures to prevent
interference.

www.assmann.com

Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany