Digitus DA-70155-1 User Manual

USB TO SERIAL

CONVERTER

User Manual

(DA-70155-1)

Index:
A. Windows Driver
B. MAC Driver
C. Linux Driver

A. Windows Driver

1. Product Features

2. System Requirements

3. Driver Installation (Win2000)

4. Changes COM Port

5. Setting up the RS232 Serial Device

1. Product Features

 USB Specification Rev. 1.1 compliant
 Support the RS232 Serial interface
 Over 1Mbps data transfer rate
 Supports remote wake-up and power management

2. System Requirements

 IBM PC 486DX4-100 MHz CPU or higher or compatible system
 Available USB port
 CD-ROM drive
 Windows 2000/XP/Vista7/8

3. Driver Installation (Win2000/XP)

Follow the steps below to install Window 2000/XP driver of USB-Serial cable:

1. Power on your computer and make sure that the USB port is enabled and
working properly.

2. During installation, please don’t link USB-Serial cable with your computer.

3. Double click ‘setup.exe’, then it will start installation

4. After installation, click ‘OK ’

5. Plug in the USB-Serial cable into the USB port and run the Found New Hardware
Wizard to assist you in setting up the new device. Click next to continue.

6. Click Next to continue. Select the
“Search for a suitable driver for my device (recommend)“

7. Windows will detect the driver and Click Next to continue installation.

8. Click Finish to continue and let Windows copy the needed files to your hard disk.