Digitus DA-70119, DA-70145, DA-70155 Service Manual

USB TO SERIAL

CONVERTER

User Manual

(DA-70155)

Index:
A. USB-Serial Cable
B. USB-Serial Converter
C. How driver works with Modem on Linux RedHat 7.3

A. USB-Serial Cable

1. Product Features

2. System Requirements

3. Driver Installation (WIN2000)

4. Changes COM Port

5. Setting Up the RS232 Serial Device

1. Product Features

 USB Specification Rev. 1.1 compliant
 Support the RS232 Serial interface
 Over 1Mbps data transfer rate
 Support remote wake-up and power management

2. System Requirements

 IBM PC 486DX4-100 MHz CPU or higher or compatible system
 Available USB port
 CD-ROM drive
 Windows 2000

3. Driver Installation (WIN2000)
Follow the steps below to install Window 2000 driver of USB-Serial cable:

1. Power on your computer and make sure that the USB port is enabled and working
properly.

2. During installation, please don’t link USB-Serial cable with your computer.

3. Double click ‘setup.exe’, then it will start install

4. After installation, click ‘OK ’

5. Plug in the USB-Serial cable into the USB port and run the Found New Hardware
Wizard to assist you in setting up the new device. Click next to continue.

6. Click Next to continue. Select the “ Search for a suitable driver for my device
(recommend) “