Page 1
BLUETOOTH
“STEREO BASS” HD SPEAKER
Quick Installation Guide
DA-10292 & DA-10293
Page 2
Digitus Bluetooth “Stereo Bass” HD Speaker DA-10292/DA-10293 is a high quality
speaker that supports wireless music streaming and mobile phone A2DP function. It
also supports AAC and apt-X option codec for A2DP function. After connecting to
the DA-10292/DA-10293 via a Bluetooth USB audio dongle or audio adaptor, user
can listen to music in streaming mode. It is perfect for an add-on for your home
entertainment system.
1 Speaker Features
Function Keys
Location Keys Function
Volume up Volume up ( Long press for forward )
Volume down Volume down ( Long press for backward )
MFB button Power on / off / Play/Pause/Pairing function
MFB Button
Vo l u m e U p
Volume Down
Audio in jack
Micro USB
for Charge
battery
LED
Mini 8pin Port
Page 3
LED indicators
Color LED Status Function
Blue Status LED lights up steady Standby(no connection )
Status LED flashes Linked
Status LED and Charging LED
Flash alternative
Pairing state
Red Charging LED flashes slowly Low battery
Charging LED lights up steady Charging (Indicator turns off when
charging is completed.)
2 Charge your speaker
After opening the package, please make sure to do the following steps full
charge the speaker by charge it at least 3 hours. The Red LED will be steady
on when charging. The LED will go off when battery is fully charged. When
battery is low, red LED will flash. Battery will fully charge within 2 hours.
3 Power on or off your speaker
Press MFB key about 3 seconds to power on the audio speaker. When the
audio speaker power on the blue led will flash 3 times and you can hear a rising
tone. When audio speaker already power on, press MFB key about 3~4 se-
conds will power off the audio speaker. When the audio speaker power off the
red led will flash 3 times and you can hear a falling tone.
4 Pairing device with your speaker
Pairing audio speaker to your Bluetooth mobile phone or other Bluetooth de-
vices, for the first time only. The audio speaker will store paired device, so you
don’t need pair it every time. To put audio speaker into pairing mode, press and
hold the MFB button for six seconds from power off state and wait for the blue
and red led flash alternative that indicates the speaker is into the paring mode.
Operate your Bluetooth mobile phone or other Bluetooth device to start Blue-
tooth function. Find the speaker “DA-1029-S”, press the pairing code “0000”
The blue LED is start flashing, the audio speaker is in connected mode
Page 4
5 Working in connectable mode
Long press MFB and Vol- key to enable proximity pairing
6 Working in A2DP mode
Short press MFB key to toggle play/pause action
Short press Vol+ or Vol- to adjust volume
Long press Vol+ for forward function
Long press Vol- for backward function
7 Led statuses
POWER ON
Blue LED flash 3 times
POWER OFF
Red LED flash 3 times
PAIRIN G
Blue and red LED flash alternative
STANDBY MODE
Blue LED steady On
AV ACTIVE MODE
Blue LED flash twice every 2 seconds
LOW BATTERY INDICATION
Red LED flash once 2 sec continuous
8 Trouble shooting
If the audio speaker does not work, try the following:
• Ensure connecting devices are charged not in low battery state
• Turn off all devices and then turn them on in order to shown in this guide
• Ensure devices are within 10 meter range
• Ensure the audio speaker is connected by check the blue LED flash
Loading...