Digitone Call Blocker Code List

Code

30

Mode

or

Action

Standard

(default)

Mode

Call Blocker Codes and Procedures

Explanation

When calls come in, all phone numbers that are Invited will ring phones
throughout your home/office like normal and to the TEL phone port on the back
of the Call Blocker, except for Anonymous, Out Of Area, Private and Unknown
callers showing no phone number. These calls will be answered by the Call
Blocker for processing and by default be hung-up on unless program Code 72 is
enabled to allow these call types to ring in. Blocked callers will be immediately
answered and after eight seconds, get hung-up on.

To enable this (default) Mode, press and hold the Program Button for 3 seconds
until you see “Program Mode”, then “Pick Up Phone”, when the prompt for
“Enter Code” displays enter code 30, display shows function. You can use Code
76 to override the block function for Out of Area + no number call types or Code
74 to override the block function for Private + no number call types. These two
codes will allow those callers you need to hear from Out of Area (overseas) or
Private (neighbors) to ring through. You can also use Code 52 to invite up to 10
callers within a blocked area code.

31

32

Business

Mode

Standby

Mode

If you are running a business and want to hear from Anonymous, Out Of Area,
Private and Unknown callers as well as any other type of call, you can enable
Business Mode Code 31 to allow calls through to the TEL phone port except
those you want to block. This mode also works with your phone company’s
voice mail but also blocks those phone numbers you have entered into the
Blocked Callers List. Blocked callers will be immediately answered and after
eight seconds get hung-up on.

To enable this Mode, press and hold the Program Button for 3 seconds until you
see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code”
displays enter code 31, display shows function.

In Standby, the TEL phone port will be connected directly to the telephone line
and phones connected there will ring. This feature allows you to leave the Call
Blocker off whenever you like without disconnecting the device and the RED
light will blink slowly.

To enable this Mode, press and hold the Program Button for 3 seconds until you
see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code”
displays enter code 32, display shows function.

Code

N/A

Mode

or

Action

Block A

Caller

who has

called

Explanation

Use the ³ or º viewing buttons to find the number you wish to block, and press
the Block button twice quickly on the front panel. “NBR Blocked” will display
and the light indicator will flash to show that call is now on the Blocked Call
List.

When a blocked caller calls in, the caller ID will display their number and
“Blocked” with the light flashing to show the call is being answered and hung up
on.

40

40

41

Block A

Caller by

Entering

Their
Number
Directly

Block An

Area

Code

View

Blocked

Caller

List and

Remove
A Block

To Block specific individual callers, press and hold the Program Button for 3
seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt
for “Enter Code” displays, enter Code 40 to store a number of your Blocked
caller followed by the 10 digit number, then the * key.

Example for a Blocked number enter: Code 40, 602 555 1212 *, display shows
function. You can store up to 80 numbers.

To Block specific area codes, press and hold the Program Button for 3 seconds
until you see “Program Mode”, then “Pick Up Phone”, when the prompt for
“Enter Code” displays, enter Code 40 to store an area code followed by the # key
7 times, then the * key. The # key is used as a wildcard replacement for any
number.

Example for Blocked area code enter: Code 40, 602 ### #### *, display shows
function. Area codes are displayed as just the area code and included in the 80
number limit stored.

To view Blocked Caller list, press and hold the Program Button for 3 seconds
until you see “Program Mode”, then “Pick Up Phone”, when the prompt for
“Enter Code” displays, enter Code 41. Now use arrow buttons to view up or
down.

To remove an entry press and hold the Block Button for 3 seconds on the front
panel. The number will then be removed from that list and entered back into the
Invited list if code 96 # * (Global Invited List) is active.

Press and hold the Program Button for 3 seconds until you see “Program Mode”,

92

View All

Installed

then “Pick Up Phone”, when the prompt for “Enter Code” displays, enter code 92
to see all the codes that have been entered.

Codes

Codes In Effect As of 10-27-2011: 01 30 70 73 75 77 80 85 87 91 96