DIGITECH Audio GE4136 User Manual

MODEL GE4136

TURNTABLE PLAYER

- USER MANUAL -

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING :

TO REDUCE THE RISK OF FIRE OR ELECTIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO

The lightning flash with arrowhead symbol, within an equil ateral triangle, is intended to alert the
us er to th e pr es en ce of uni ns ul at ed “ da ng er ou s voltage“ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is inte nded to alert the user to the pr e s en c e o f im p o rt a n t
operating and maintenance (servicing) instructions in the literature accompanying the appliance.

-

DO NOT REMOVE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER
SERVICEABLE PARTS ARE WITHIN!

-

IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT A SERVICE REFFERRAL.
DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.

-

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

- DO NOT INSTALL THIS EQUIPMENT IN A CONFINED SPACE, SUCH AS A BOOK CASE OR BUILT IN
CABINET.

- THE APPARATUS MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING.

1

LOCATION OF CONTROLS

1. Turntable

2. 45 RPM Adapter

3. Cue-lever (use this lever to lift the tone arm)

4. Tone Arm

5. Speed Selector

6. Tone Arm Holder

7. Dust Cover

8. Grill

9. Auto Stop (On/Off) Selector

10. Function Selector (Phono/Off)

11. Bass Boost Control

12. Power Indicator

13. Volume Control

14. Headphone Jack

15. Speaker connection

16. Internal Speaker (On/Off) Selector

17. AC Power Cord

POWER SOURCE

This Unit is designed to operate on normal 240V ~ 50Hz household power source. Do not attempt to operate
the system using other power sources. This may result in damage to the unit and void your warranty.

Mains plug should be regularly checked. If it is found damaged, do not turn on the unit and immediately seek
advice from a qualified service technician. Any malfunction due to electrostatic discharge (ESD), reset the
unit by unplugging AC Cord from the outlet; wait for few minutes before reconnect

2