1
The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even
under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or
death.
The symbol is used in the service documentation to indicate that specific component shall be replaced
only by the component specified in that documentation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
ON: Denotes the apparatus is turned on
OFF: Denotes the apparatus is turned off.
WARNING: Describes precautions that should be observed to prevent the danger of injury or death to the operator.
CAUTION: Describes precautions that should be observed to prevent danger of the apparatus.
1. IMPORTANT SAFETY INSTRUCTIONS
·Read these instructions.
·Keep these instructions.
·Heed all warning.
·Follow all instructions.
·Water & Moisture
The apparatus should be protected from moisture and
rain, can not used near water, for example: near bathtub, kitchen sink or a swimming pool, etc.
·Heat
The apparatus should be located away from the heat
source such as radiators, stoves or other appliances
that produce heat.
·Ventilation
Do not block areas of ventilation opening. Failure to
do could result in fire. Always install accordance with
the manufacturer's instructions.
·Object and Liquid Entry
Objects do not fall into and liquids are not spilled into
the inside of the apparatus for safety.
·Power Cord and Plug
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Do not defeat the safe ty purpose of the pola rized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, refer
to electrician for replacement.
CAU TION
RISK OF E LECTR IC SHOC K
DO NOT OP EN
IMPORTANT SAFETY SYMBOLS
°
·Power Supply
The apparatus should be connecte d to the power supply
only of the type as marked on the apparatus or described
in the manual. Failure to do could result in damage to the
product and possibly the user.
Unplug this ap parat us duri ng ligh tning s torms or when
unused for long periods of time.
Where the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
·Fuse
To prevent the risk of fire and d amaging the unit, please
use only of th e recommende d fuse type as described i n
the manual. Before replacing the fuse, make sure the unit
turned off and disconnected from the AC outlet.
·Electrical Connection
Improper electrical wiring may invalidate the product warranty.
·Cleaning
Clean only with a dry cloth. Do not use any solvents such
as benzol or alcohol.
·Servicing
Do not implement an y servicing other t han those means
describe d in the man ual. Refe r all serv icing to q ualified
service personnel only.
·Only use accessories/attachments or parts recommended
by the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Owner`s Manual
TECHNICAL SPECIFICATIONS
MODEL
POWER TYPE
POWER(RMS)
IMPED(ohm)
TWEETER
WOOFER
FREQUENCY
SENSITIVITY
(1w@1m)
GROSSWEIGHT
(Kg )
PACK AG E
(HX WXD) (Mm )
CS-2484 CS-2486
180W 200W
Bi- Ampli fied Bi- Ampli fied
CLASS A/B CLASS A/B
8 8
1.0 " 1.0 "
25m m Ti dome d riv e 25m m Ti dome d rive
12 "
38. 6mm voi ce coil /
15 "
55m m voice c oil/
50Hz-20KHz 50Hz-20KHz
98db 98db
15.5 17.5
635X420X340 760X490X405
6
Rig ging Po ints : Th is se ries sp eaker s inclu de four r iggin g point s.
The se poin ts are de taile d on page s ix. The r iggin g point s are
use d to fly or s uspen d the spe aker in t he air by s ome mea ns.
Rigging and Mounting Options