Digital Watchdog MegaPix LPR, DWC-MB44iALPR Quick Start Manual

Download

Page 1

5. Loose n the pan and tilt screws at the base of the c amera’s bracket to adjust

the camera’s view and position.

6. To use the camer a’s water proof wiring:

(1). Install the LAN c able into .

(2). will be assemble d to with a 1/4 turn.

(3). Thread tightly to .

STEP 1 – PREPARING TO MOUNT THE CAMERA STEP 3 – INSTALLING AN LPR CAMERA

STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES

1. The mounting su rface must bear ve times th e weight of your camera.

2. Do not let the c ables get caught in imprope r places or the electric line c over

to be damaged. Thi s may cause a breakdown or re.

3. Using th e mounting template sheet or the cam era itself, mark and drill the

necessar y holes in the wall or ceiling.

4. Pass the wires through and make all necessary connections.

a. NET WORK CONNECTIONS – Using a PoE Switch o r PoE Injector,

connect the camera using an Ethernet cable for both data and power.

b. NETWORK CONNECTIONS – Not using PoE Switch or PoE Injector,

connect the camera to the switch using an Ethernet cable for data transmissio n and use a power adapter to power the came ra.

Power Requiremen ts Power Consumption

DC12 V POE (IEEE 802.3af Cl ass 3)

DC12V: Max 11W PoE: Max 12.9W PoE Injector Not Included

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thr u Friday

digital-watchdog.com

Resetting the camera: To reset the camera, use th e tip of a paper clip or a pencil and pr ess the reset button. Pressing th e button for ve (5) seconds will i nitiate a camera-wide reset of all th e settings, including network settings.

DWC-MB44iALPR

WHAT’S IN THE BOX

QSG Manual 1 Set

Screw & Plastic Anc hor – 4pcs

1 Set

Template Sheet

1 Set Tor x Wren ch 1 Set

Test Video Cable

1 Set DC Plug Cable 1 Set

Waterproof Cap

1 Set

Test Video Output

Reset Button

NOTE: Downl oad All Your Support Mate rials and Tools in One Plac e

1. Go to: http://www.digital-watchdog.com/support-download/

2. Search your pr oduct by entering the pa rt number in the ‘Search by Product’ search

bar. Results for applic able part number s will populate autom atically based on th e part numb er you enter.

3. Click ‘Search’. All supporte d materials, includ ing manuals, Quic k Start Guides

(QSG), softwar e and rmware will app ear in the results.

Quick Start GuideQuick Start Guide

Attention : This document is int ended to serve as a qui ck reference for in itial set-up. It is re commended that th e user read the entir e instruction ma nual for complete and proper installation and usage.

Default Login Information

Username: admin Password: admin

STEP 3 – INSTALLING THE CAMERA

NOTE: To ensure moisture s eal, make sure the o-ring is in plac e between

and . In extreme e nvironments use of an outdoor rated sealer is recommended.

NOTE: When using the waterproof cap, crimp the RJ45 connector after

passing the cable through the waterproof cap.

THE CAPTURED IMAGE SHOULD BE FILLED WITH THE FULL WIDTH OF THE VEHICLES

THE CAMERA SHOULD BE MOUNTED AT AN ANGLE NO GREATER THAN 30 DEGREES

>11.5ft

< 30°

< 20°

CAMERA ANGLE NO GREATER THAN 20 DEGREES FOR SIDE MOUNT INSTALLATIONS

Page 2

STEP 4 – CABLING

STEP 5 – MANAGING THE SD CARD

Use the diagram b elow to properly connect power, networ k, audio, alarm and sensors to the cam era.

1. To install the cam era’s SD Card, locate the SD car d slot in the bottom of

the camera by uns crewing the con cap.

2. Inser t class 10 SD/SDHC/SDXC card into the SD card slot by pressi ng

the SD card until cl icks.

3. To remove the SD card, pre ss the card inward until it clicks to rele ase from

the card slot than p ull out from the slot.

Using a PoE Swi tch or PoE Injector Not u sing PoE Switch or PoE Inj ector

Power

Ethernet cable

Quick Start Guide

NOTE: Max imum SD Card size supported: 64GB.

When inser ting the SD card into the card slot, the SD ca rd’s contacts shou ld be facing upward, as shown in the diag ram.

NOTE: Please s ee the full product manual for we b viewer setup,

functions and camera settings options.

7. To view the camera’s web viewer, click on ‘V iew Camera Website’.

8. To save the change s made to the camera’s settings, input the ID an d PW of

the camera for au thentication and click ‘Save’.

9. If the c amera needs to be rebooted afte r the settings were changed, pre ss

the ‘Reboot’ but ton. The camera will cycle power an d will appear back in the search results once the reboot is complete.

6. The ca mera’s default netwo rk

information is:

STEP 6 – DW IP FINDER

™

Use the DW IP Finder™ software to sca n the network and detect all MEGA pix® IP cameras, set th e camera’s network settings or acce ss the camera’s web client.

Rev Date: 09/17

Specications and pricing are subject to change without notice.

Select DHC P if the internet servi ce is dynamic IP. This will allow the ca mera to receive its IP a ddress from the DHCP se rver.

Select STATIC to manuall y enter the camera’s IP addre ss, subnet mask, Gateway and DNS in formation.

Contact your network administrator for more information.

Default TCP/IP information

• IP: DHCP

‘Port Forwa rding’ has to be set in your net work’s router for externa l access to the camera .

Default ID / PW : ad min / admin

Network Setup

1. Go to: http://www.digital-watchdog.com

2. Search fo r ‘IP Finder’ on the quick search ba r at the top of the page.

3. The late st DW IP Finder

™

software wi ll appear in the search result s. Click on

the link to download th e le to your computer.

4. The s oftware will scan your netwo rk for all supported came ras and display

the results in the ta ble. Allow up to 5 seconds for the DW IP Fin der™ to nd the camera on the network.

5. Sele ct a camera from the list by double -clicking on the camera’s image

or clicking on t he ‘Click’ button under the IP Conf. col umn. The camera’s network infor mation will appear. If necessar y, you can adjust the ca mera’s network type.

Search for Devices

Came ra’s Network Settings

Camera’s Live Thumbnail View

Came ra’s Firmware Version

Camera Uptime

Open Camera’s Network Settings Window

Filter Search Results

Camera Name, Model, IP Address, and MAC Address

Firmware Upgrade

Select which Network to Scan

Show/ Hide Thumbnail View

STEP 7 – WEB VIEWER

NOTE: Some Me nu options may not be available base d on the camera

model. See the fu ll manual for more information.

The GUI disp lay may differ by cam era models.

Once the came ra’s network setting s have been setup properly, you can acce ss the camera’s web viewer us ing the DW IP Finder™.

To open the camera’s web viewer:

1. Find the camera using th e DW IP Finder™.

2. Double-click on the camera’s view in the results table.

3. Press th e ‘View Camera Website’. The camera’s web viewer will op en up

in your default we b browser.

4. Enter th e camera’s username and password (defau lt are admin / admin).

5. If you are a ccessing the camera for the r st time, install the VLC player for

web les in order to v iew video from the camera.

Alarm In

DI: Orange DI COM: Yellow DO1(N.O.): Green DO1 COM: Blue

Alarm Out

Audio In

(WHITE Jack)

Audio Out (RED Jack)