Digital Watchdog DW-DTWT, DW-DTPM, DW-DTCAW Specsheet
Illuminator Accessories
DW-ILWM1 - Mounting bracket for a single (1)
NightWatch™ illuminator
• ‘L’ wall mount bracket for single illuminator.
• Compatible with all infra-red and white-light illuminators.
• Allows up to 180° rotation.
• Fully adjustable (left, right, up and down).
• Stainless steel construction (black powder coated).
DW-ILWM2 - Mounting bracket for two (2)
NightWatch™ illuminators
• Dual illuminator mounting bracket compatible with all infra-red and white-light illuminators.
• Doubles the angle of illumination.
• Increases illumination distance by a factor of 1.4x when using two equivalent illuminators.
• Mix-and-match illuminators (angle and distance).
• Mix-and-match infra-red and white-light illuminators for a hybrid solution.
• Fully adjustable (left,right, up and down).
• Includes IP67 dust-tight and water-proof to 1 meter junction box.
• Stainless steel construction (black powder coated).
DW-ILWM3 - Mounting bracket for three (3)
NightWatch™ illuminators
• Triple illuminator mounting bracket compatible with all infra-red and white-light illuminators.
• Triples the angle of illumination.
• Increases illumination distance by a factor of 1.7x when using three equivalent illuminators.
• Mix-and-match illuminators (angle and distance).
• Mix-and-match infra-red and white-light illuminators for a hybrid solution.
• Fully adjustable (left, right, up and down).
• Includes IP67 dust-tight and water-proof to 1 meter junction box.
• Stainless steel construction (black powder coated).
DW-ILPM1 - Pole-mount bracket for a single (1)
NightWatch™ illuminator
• Single pole-mount bracket compatible with all infra-red and white-light illuminators and illuminator
mounting brackets.
• Supplied with stainless steel straps to fit 2.95” to 7.87” (75mm to 200mm) diameter pole.
• Stainless steel construction.
: 866.446.3595
REV:08/19
: sales@dwcc.tv
Copyright © DW. All rights reserved. Specifications and price subject to change without notice.
: www.digital-watchdog.com
Detector Accessories
DW-DTWT - Walk tester for SiteWatch™ motion detectors
An installation tool to help set up SiteWatch™ detectors on site.
• Power 9VDC (PP3 Cell).
• Current standby: 0.5mA.
• Operating: 30mA.
• Operating temperature: -4°F to +131°F (-20°C to +50°C).
DW-DTCAW - White conduit cable entry adaptor for SiteWatch™
motion detectors
For surface mount conduit and cable installations. Complete with integral wall tamper system.
• Suitable for 0.78” (20mm) conduit protected surface run cables.
• Integrated rear tamper mechanism designed to perfectly interface with rear tamper plunger fitted
on all SiteWatch™ detectors.
• Supplied with body locking screws plus wall fixings.
DW-DTPM - Pole mount clamp for SiteWatch™ motion detectors
For mounting SiteWatch™ detectors on poles from 1.57” to 6.69” (40mm to 170mm) in diameter,
maximum two detectors per clamp kit.
• Two coated metal pole clamps c/w threaded bar and locking nuts and washers.
• Supplied with separate tamper-plate and fixing-screws.
: 866.446.3595
REV:06/19
: sales@dwcc.tv
Copyright © DW. All rights reserved. Specifications and price subject to change without notice.
: www.digital-watchdog.com
Loading...