Digital Watchdog DWC-V7DECO Quick Start Guide

Decorative rings for V7 ultra
low-profile vandal domes

1

Make sure the camera housing has been installed
properly.

2

Align the cover ring’s notch with the housing’s
cable hole.

Quick Start Guide

3

Push the cover ring into place making sure to
protect the camera’s clear bubble. Check that the
cover ring is secure.

Warning:

When removing the camera’s top case cover, be
careful not to get dirt on the bubble.

NOTE: Download all your support materials and tools in one place

1. Go to: http://www.digital-watchdog.com/resources

2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will
appear in the results.

Tel: [phone]

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

Copyright © Digital Watchdog. All rights reserved. Specifications and pricing are subject to change without notice.

Rev Date: 06/19

digital-watchdog.com