Digital Watchdog DW-BJCUBE8T-DL, DW-BJCUBE4T-DL, DW-BJCUBE20T-DL, DW-BJCUBE16T-DL, DW-BJCUBE12T-DL Quick Start Guide

Quick Start Guide
State of the art hyper-optimized video management platform designed for ease, speed and efciency.
®
Blackjack
DW-BJCUBE4T-DL DW-BJCUBE8T-DL DW-BJCUBE12T-DL DW-BJCUBE16T-DL DW-BJCUBE20T-DL
Cube Deluxe — Up to 96 2.1MP Cameras (1080p True HD Resolution)
or upto 3 Panzilla® MEGApix® 48MP Cameras -DWC-PZV2M72T
Blackjack Cube-DL
Default Login Information for DW Spectrum® IPVMS
Username: admin Password: admin1234
WHAT’S IN THE BOX
CUBE Deluxe Server
Quick Start Guide
NOTE: Download All Your Support Materials and Tools in One Place
1. Go to: http://www.digital-watchdog.com/support-download/
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will
populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides (QSG), software and rmware will appear in the results.
1 Set Recover y USB 1 Set Power Cable 1 Set
1 Set
Keyboard and Mouse
1 Set
Attention: This document is intended to serve as a quick reference for initial set-up.
See the DW Spectrum full manual for more information on features and functionality.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
BLACKJACK CUBE DELUXE HARDWARE
F3
Front
F4
F5
F1 F2
F7
F6
Back
B1
B4
B2 B3 B5 B12 B14
B8
B9
B6B7B11 B13
B10
F1 HDD LED F2 Power Button / Power LED F3 5.25" Bay F4 USB 2.0 Port F5 Microphone Jack F6 Headphone Jack F7 USB 2.0 Port
B1 AC Power Socket B2 Display Port (Not Used) B3 HDMI Port (Not Used) B4 VGA Port (Not Used) B5 USB 3.0 Ports B6 USB 2.0 Ports B7 LAN Port B8 Clear CMOS Button B9 PS/2 Port B10 Line-In Jack B11 Line-Out Jack B12 Microphone Jack B13 4x Mini Display Ports B14 NIC Port (Connect to
Camera Network)
Default Login Information for Pre-Installed DW Spectrum® IPVMS
Username: admin Password: admin1234
WARN ING For an optimal system conguration, it is recommended that a UPS (Uninterruptible Power Supply) be used to power the setup.
Dual monitors are not recommended due to CPU performance. To connect two monitors to the Cube, go to the display setup to activate the second monitor.
SPECIFICATIONS CUBE DELUXE
PART NUMBER Blackjack CUBE DELUXE
Maximum IP Cameras 96
Included IP Licenses 4
Form Factor Desktop
Operating System
CPU Intel® i7® Processor
Memory 16GB
Ethernet Port 2x Gigabit Ethernet (RJ45)
System Max Video Storage Rate (Mbps)
Storage
Video-Out
Pre-Loaded VMS Software DW Specturm
Remote Clients Cross Platform - Windows
Mobile Apps iOS® and Andriod®
Keyboard & Mouse Included
Power Supply 300W**
Operating Temperature and Humidity 41°F~104°F / 20~90% RH
Dimension (WxDxH) (inches) 8.5" x 13" x 7.5"
Warranty 5 Year Limited
2
®
Windows
7 64 Bit DW-BJCUBExT-DL
OS on SSD Yes
Maximum Hard Drives 1 x SSD + 2 x SATA HDD
(3 Panzilla® MEGApix® 48MP Cameras — DWC-PZV2M72T)
Maximum Storage 20TB
Outputs 4x MiniDisplay Port
Resolution HD 1080p
480Mbps
®
IPVMS
®
, Linux Ubuntu® and Mac®
* Availab le at tim e of initi al orde r only / * * UPS Rec ommended
SETTING UP THE CUBE DELUXE
STEP 1: When setting up the Blackjack Cube Deluxe, make sure the following are in the box:
STEP 2: 1. Connect a monitor, USB mouse, and network cables (not included).
2. Connect the server to an appropriate power supply.
3. In the server’s login screen, enter username and password (admin / admin).
STEP 3: Desktop View
The server’s Network Setup Window and DW Spectrum
Cube Server
Recovery USB
Keyboard and Mouse
NOTE Monitor is not included.
To relaunch, double click on each of the desktop icons.
Quick Start Guide
Power Cable
®
software will launch automatically when the server boots up.
Quick Start Guide
Windows 7
WINDOWS-BASED SOFTWARE MANUAL LAUNCH
To launch the DW Spectrum® Software on the Windows-Based Cube:
OPTION 1: Double-click the DW Spectrum® desktop icon. OPTION 2: Go to ‘Start’ on
the bottom left and select
®
from the
OR
DW Spectrum
Start Menu.
3
SETTING UP DW SPECTRUM® MEDIA SERVER
Login : admin Password : admin1234
STEP 1: Initial run from Blackjack® server
®
1. Open DW Spectrum
2. Click on the precongured server.
Client by double click on the DW Spectrum icon
3. Enter password and click connect.
* Default password : admin1234 (case sensitive)
4
STEP 2: To rename the server
1. Right click on the server name listed on the Resources then click Server Settings.
Quick Start Guide
2. Go to General tab, then type in the new server name in the Name eld and click OK.
5
STEP 3: To check for update
1. Click on the menu then click System Administration.
2. Go to Updates tab. Click Update System if turned orange.
6
Quick Start Guide
* If you are on the latest version, it will say “You have the latest version installed” and the Update System button will be greyed out.
3. Click OK when update is completed.
STEP 4: Enter License
1. Go to System Administration then click License tab.
2. Enter License Key then click Activate License button. (Internet connection required)
* Click on Activate Trial License if you have not purchased the valid license.
7
3. Click OK to when the License is activated.
STEP 5: Configure recording
1. Right click on the camera to setup recording, then click Camera Settings.
8
2. Go to Recordings tab.
Quick Start Guide
3. Click to turn on recording.
4. Congure Schedule Settings for Quality, FPS and Recording Type.
5. Click and drag mouse over the Recording Schedule to assign the recording setting.
9
* Click on All to apply to the all schedules.
6. Red dot will appear next to the camera when the recording is started.
10
STEP 6: Backuping Database
1. Go to System Administration and click General tab.
Quick Start Guide
2. Click Create Backup… button.
3. Navigate to the folder where to save and enter name of the backup le then click save.
* Strongly recommend to also backup to the external storage media.
NOTE: More information and instructions are available in the Spectrum 3.0 Manual.
11
TROUBLESHOOTING TIPS
Problem Possible Solutions
My camera does not auto-discover
Videos are slow
My camera appears disconnected
I can’t get playback video from my camera
I get an ‘unauthorized’ message on my camera
1. Is the camera in the same LAN network as the Media Server?
2. Is your camera compatible with DW Spectrum? (Refer to our website for full list of supported cameras.)
3. Is the camera updated to its latest rmware?
4. If your camera is integrated with DW Spectrum via ONVIF, make sure ONVIF is enabled on your camera.
5. Try adding the camera manually.
6. Try rebooting the ser ver after installation. Allow up to 2 minutes for the ser ver to map your network and detect all supported devices.
1. Are you accessing the same cameras from multiple clients? (LAN & WAN)
2. Do you have a Gigabit network? Check your network speed.
1. Under camera settings, make sure the user name and password are correct.
2. Under the camera settings, use the ‘Ping’ button to make sure the camera is connected to the network properly.
3. If you can connect to the camera’s web viewer, try rebooting the camera and/or restore it to factory default.
4. Make sure your camera is using the latest rmware available.
5. Make sure that the camera is connected to the same network as the server.
6. If you are connecting to a camera that is integrated with DW Spectrum via the ONVIF protocol (see list), make sure ONVIF is enabled.
7. Make sure your user has permissions to view that specic camera.
1. Do you have network connection between client and server (in case server and client are not on the same machine)?
2. Make sure your user has playback viewing permissions for the selected channel.
3. Make sure the camera is set to a recording mode that would provide recorded video for the selected time and environment.
4. On the server side, check the media server log to make sure the camera you are trying to watch has not been unexpectedly disconnected.
1. Make sure the camera’s user name and password are properly entered in the camera’s general information under the camera settings menu.
2. If necessary, try rebooting the camera to apply the camera’s user name and password.
SYSTEM REQUIREMENTS
Recommended Specs for the Full Client
Processor Intel Core i5 or greater
Video Card Intel HD Graphics 2500 (or higher) with 1GB Dedicated Memory
Resolution 1920 x 1080
RAM 4GB
NIC 10 / 100 / 1000 Base-T Ethernet
Windows 7
OS Supported – Media Server
Linux OS
OS Supported – Client
* Except Storage Server version
** For Windows 10, recommend 6th Generation Intel i3/i5/i7 processors with 16GB RAM and video card with 1GB or higher RAM
Important: OS not listed will be not be supported by DW™ Tech Support
Windows 7 Standard, 7 Pro, 7 Ultimate, 8/8.1 Pro, 8.1 Enterprise, 10 Pro/Enterprise
Windows Servers*
Linux Ubuntu 14.04, Ubuntu 16.04
Windows
Windows Servers*
Linux Ubuntu 14.04, Ubuntu 16.04
Mac OSX 10.11, OSX 10.12
Any versions of 2008, any versions of 2008 R2, any versions of Server 2012, any versions of Server 2012 R2
7 Home, 7 Standard, 7 Pro, 7 Ultimate, 8/8.1 Standard, 8/8.1 Pro, 8.1 Enterprise, 10 Home/Pro/Enterprise**
Any versions of 2008, any versions of 2008 R2, any versions of Server 2012, any versions of Server 2012 R2
Rev Date: 08/17
Tel: +1 (866) 446-3595
Fax: (813) 888-9262
www.digital-watchdog.com sales@dwcc.tv
Speci cations and p ricin g are subject to ch ange without n otice.
Copyright © Digital Watchdog. A ll rig hts rese rved.
Loading...