digital snitch PEDB619 User Manual

Digital Snitch BMW Night Hawk
Model: PEDB619
Digital Snitch BMW Night Hawk
Thank you for purchasing the Digital Snitch BMW Night Hawk. Please first read over this manual for proper use.
Digital Snitch BMW Night Hawk
Light Key: Green light: Standby Blue light: Power on/off, saving data,
taking picture, & Charging
Using the included usb adapter,
charge the device for a minimum of 4 hours before first use.
Infrared/ Night Vision is
automatically activated under low lighting conditions in both photo and video mode.
Important:
1.) Device must be off when plugging into computer to retrieve data. Once plugged in, you will see a red indicator light flash, then it will turn blue. At this point, you will be able to open the files on computer.
2.) To reset device, make sure device is powered off. Then insert a paperclip into the hole on back and push. This will reset the product and delete all files on device.
3.) MUST PLUG DEVICE IN AND RE-SET DATE AND TIME BEFORE
USING. (Follow steps at bottom) How to insert memory card:
1.) The recorder supports micro SD cards only.
Digital Snitch BMW Night Hawk
2.) At bottom of device to the left of the key ring hole, slide open. There you will see a place to insert a memory card and also a port to plug device in. (Please see diagram 1)
3.) Insert the chip into the memory card slot with the pins down going into the device but facing up (See diagram 2)
4.) Use a small object, like a paperclip, to push the card until the chip is in place.
Diagram 1 Diagram 2
How to take a snapshot:
1.) Push the ON/OFF button until the indicator light turns a solid green (standby mode)
2.) Push the ON/OFF one time (the light will flash 1 time to indicate you took a picture)
3.) After the picture is taken, unit goes back to standby mode.
Digital Snitch BMW Night Hawk
How to Record Video:
1.) Push the ON/OFF button until the indicator light turns a solid green (standby mode)
2.) Press the REC button once, do not hold. (The green light will flash 3 times and go out to indicate you are in record mode)
3.) To stop recording, press the record button once again. The steady green light will come on. (standby mode)
How to retrieve pictures and playback videos:
1.) Use the supplies USB cable to connect the recorder to your computer, with the microSD card still inside.
2.) Go to “My Computer” and double-click on the new “Removable
Disk.” OR a pop up box will display (AutoPlay) and you can select “open
folder to view files.”
3.) Double-click on the “DCIM” folder.
4.) Double-click on “100DSCIM” folder.
5.) In this folder you will see the items displayed as followed. Click and review.
Digital Snitch BMW Night Hawk
How to Edit Time and Date:
1.) With your device plugged into the computer, go to “My Computer”, select “Removable Disk”. If a “DCIM” folder appears delete this folder.
Otherwise proceed to step 2.
2.) Go to file at top, and down to new. Select Text Document.
3.) Once this appears, rename it to → time.txt (all lower case)
4.) Double click this folder. (time.txt)
5.) Enter in space provided exactly how shown below, except put in current date and time. Use one space between date & time. Start with year, then month, then date. For time, put hour, min, then second. Exactly as shown below.
2013-05-14 14:56:09
6.) Hit file at top, then save. Close all boxes and disconnect device. Begin using device and upon connect, time and date should be updated.
How to insert memory card:
1.) The recorder supports micro SD cards only.
2.) At bottom of device to the left of the key ring hole, slide open. There you will see a place to insert a memory card and also a port to plug device in. (Please see diagram 1)
3.) Insert the chip into the memory card slot with the pins down going into the device but facing up (See diagram 2)
4.) Use a small object, like a paperclip, to push the card until the chip is in place.
Digital Snitch BMW Night Hawk
Limited Warranty
The Manufacturer will repair or replace this product with new or refurbished parts from the date of the original purchase in the event of a defect in materials or workmanship, as follows: Materials and Labor: Ninety (90) days from the date of the original purchase. This warranty is extended only to the original purchaser. A purchase receipt or other proof of date of purchase and original purchase receipt will be required before warranty service is rendered. This warranty only covers failures due to defects in materials or
workmanship, which occur during normal use as described in this Operator's Manual.
The warranty does not cover damage which occurs in shipment or failures which are caused by products that are not supplied by the warrantor or failures which result from accident, misuse, abuse, neglect, mishandling, alteration, maladjustment of consumer controls, modification, rental use of the product, or service by anyone other than a manufacture service person. Opening the sealed portions of the Digital Snitch BMW Night Hawk will result in voiding of this warranty.
The Manufacturer, its Reseller(s), and Digital Snitch assume no liability associated with the use or misuse of the Digital Snitch BMW Night Hawk. Under no circumstances are the Manufacturer, its Reseller(s), Digital Snitch, its officers, agents, employees, or parent companies, liable for any loss, damage, or expenses of any kind arising out of the use, or inability to use, these products, or the suitability of use for any particular task. It is important to follow the procedure; outlined in this manual to ensure safe use of the Digital Snitch BMW Night Hawk.
The warrantor shall not be liable for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. All express and implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited to the applicable warranty period set forth above. The effectiveness of the Digital Snitch BMW Night Hawk device depends
on the skill of the operator and configuration, thus it cannot be guaranteed.
Loading...