I NSTRUCTIONS
Using the PKP-ICON Keypad
WARNING: Please refer to the System Instruction Manual for information on limitations regarding product use and
function and information on the limitations as to liability of the manufacturer.
1. Display
2. System
Lights
3. Number
Pad
4. Function
Buttons
5. Emergency
Keys
1. Display
2. System Lights:
Ready Light
If the Ready light is ON, the system is ready for
arming. The system cannot be armed unless the
Ready light is ON.
Armed Light
If the Armed light is ON, the system has been
armed successfully.
Trouble Light
If the Trouble light is ON, press to view the
troubles. The keypad will indicate the troubles
using numbers 1-8 at the top of the keypad
display. See “Identifying Trouble Conditions” in
your system’s
Instruction Manual
.
The PKP-ICON keypad shows the status of your
security system using an LCD-style display, along
with fixed words and numbers.
This instruction sheet describes the basic features
of the keypad. For more detailed information on
your security system and how to use it, please
read your system’s
Important Note: T est system weekly and ha ve an y
system trouble conditions corrected by your
alarm installer.
Instruction Manual
.
3. Number P ad:
Use the number pad to enter your code, and to
access system functions. To exit a function and
return to the Ready state, press
function press
.
. To select a
5. Function Buttons:
If your installer has enabled them
function buttons to access the stay arm, away arm,
door chime, sensor reset and quick exit features.
(Your installer may program other functions for
these buttons.) Press and hold the appropriate
button for two seconds. Refer to your
Manual
for more information on these features.
, you can use the
Instruction
4. Emergency Ke ys:
Press both * keys for two seconds to send a FIRE
message. Press both
send an AUXILIARY message. Press both
for two seconds to send a PANIC message.
* IMPORT ANT NO TE (All Keypads): The Fire, Auxiliary
and Panic keys will NO T function unless programmed
by the installer. If these keys are in service and the
installer has enabled audible feedback, holding down
the key for two seconds will cause the keypad
sounder to beep indicating that the input has been
accepted and sent.
* Keys for two seconds to
* Keys
Using the PKP-ICON Keypad
The PKP-ICON works similarly to the other keypads described in your system’s
Manual
. For more information on individual
functions, see your system’s
Instruction
Instruction Manual
light will be off. To see the numbers of the open
zones, press
. Before you try to arm your system,
go to the open zones and close all doors and
windows, and make sure no one is present in zones
.
with motion detectors.
Viewing Open Zones
Before you can arm your system, all the zones
must be closed. If some zones are currently open,
the keypad will display “Open”, and the Ready
Viewing Zones in Alarm
If there is an alarm on your system the keypad will
display “Alarm” and will scroll the numbers of the
zones affected.
System Functions - Quick Reference
The following chart lists the basic functions of your system and the keys to press for each function.
NOTE: Some functions may not be available on your system. Ask your installer for more information.
To do this: Press this:
Arm system (Away): ............................................... [access code], leave through entry/exit door
OR press
Arm system (Quick): ..............................................
Arm system (Stay):................................................. [access code], do not exit premises
Arm system (No Entry Delay): ...............................
Bypass zones: .......................................................
Disarm system: ...................................................... [access code]
Exit premises when system armed: ....................... OR press (if enabled)
Reset smoke detectors: .........................................
Program access codes.......................................... refer to “Programming Access Codes” in
Send Fire message: ............................................... (press and hold for two seconds, if enabled)
Send Auxiliary message: .......................................
Send Panic message: ............................................
Set system time and date: .....................................
Silence fire alarm: ..................................................
Silence intrusion alarm: ......................................... [access code]
Turn auto-arm on/off:..............................................
Turn door chime on/off: .......................................... to toggle on or off OR press (if enabled)
Turn on bypassed zones (if Stay armed):..............
View alarm memory: ..............................................
View troubles: ........................................................ (Troubles indicated by numbers 1-8 on top of keypad
(from Ready state)
OR press
[access code]
[two-digit zone number(s)], to exit
OR press (if enabled)
[master code] , enter current time (24hr format: 00:0023:59) and date (month/day/year) as 10 digits: [hh:mm
MMDDYY]
[master code]
display. See “Viewing Trouble Conditions” in
for list of trouble definitions)
(if enabled)
(if enabled)
Instruction Manual
(press and hold for two seconds, if enabled)
(press and hold for two seconds, if enabled)
Instruction Manual
© 1999 Digital Security Controls Ltd. Printed in Canada
29004721 R001
Loading...