Digital Projection LIGHTNING 38 1080p 3D, LIGHTNING 38 1080p 3D Ultra, LIGHTNING 45 1080p 3D Product Sheet

LIGHTNING 38- 1080p 3 D • LIGHTNING 45-1080p 3D • LIGHTNING 38- 1080p 3 D Ultra Contrast

PERFORMANCE SPECIFICATIONS

Brightness (±10%)

38-1080p 3D: 20,000 ANSI Lumens 45-1080p 3D: 30,000 ANSI Lumens 38-1080p 3D Ultra Contrast: 10,000 ANSI Lumens

Contrast Ratio (±10%)

38 & 45-1080p 3D: 2000:1 38-1080p 3D Ultra Contrast: 4000:1

Display Type

3 x .95” Dark Chip 1080p DMD™ with Fast Transit Pixels for smooth greyscale and improved contrast

DMD Specification

1920 x 1080 pixels native, 12˚ tilt angle

Fill Factor

90%

Sealed Optics at DMD™ Interface

Protects DMD’s™ from optical contamination

Source Compatibility

• Composite, s-video, and color difference

video standards

• RGB graphics standards up to 1920 x 1080

• DVI standards with HDCP compliance

• High definition RGB and color difference

standards

• High definition / standard definition serial digital formats (SD/HD-SDI)

• High bandwidth - Dual DVI, and Dual-Twin DVI

Video Processing

• Enhanced 7 point color correction

• Dual Flash Processing™ increases 60 Hz inputs to 120 Hz displayed output

• FastFrame™ Motion Blur Reduction

• Class leading Video de-interlacing/processing of SD and HD sources using auto 3:2 and 2:2 extraction, ruggedized for editing discontinuities

• Pixel-based motion adaptive interpolation

• User selectable preset, parametric

de-gamma and user downloadable de-gamma

• Frame Delay: as low as 1 frame, source dependant

• Auto mode selection - plug and play setup

High Bandwidth Input

• 3D capable

• Pixel Mapped - with low latency

• FastFrame™ Motion Blur Reduction

• 120 Hz with no frame doubling

™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.

3D Sync

Sync In - External lock Sync Out - Shutter glass control

Network Connection

LAN via RJ 45, Wireless 802.11b, full protocol feature set

Lamp Type

Proprietary xenon arc, bubble. Hyper-cooled

lamp module with directional-flow reflector mask

and radial heat exchanger. Digital Hour meter.

Lamp Life (typical)

38-1080p 3D: 500 hours

45-1080p 3D and 3D Ultra Contrast: 750 hours

Lens Mount

Zoom Lenses: Motorized horizontal and vertical lens shift, zoom and focus

Fixed Lenses: Manual focus

Lens Shift (maximum)

Fixed 1.12 and Zoom Lenses:

• Vert: +0.7, -0.5 frame; Hor: ±0.1875 frame

0.67 Fixed lens:

• Vert: ±0.1 frame; Hor: ±0.1 frame

Lens Options

0.67 :1 fixed 1.87-2.56 :1 zoom

1.12 :1 fixed 2.56-4.16 :1 zoom

1.16- 1.49 :1 zoom 4.16-6.96 :1 zoom

1.39-1.87 :1 zoom 6.16-10.49 :1 zoom

• 1.12:1 Lenses include manual aperture

• High-contrast lenses available for 0.67:1 and all zoom lenses

Mechanical Mounting

• Front or rear table; Front or rear ceiling

(ceiling mount optional)

• Rugged, staging tolerant chassis with

integrated handles

• Optional RapidRig™ frame with integrated

pitch, roll and yaw adjustments

Orientation

360˚ front to back ±15˚ left to right

Weight (chassis only)

249 lbs (113 kg)

LIGHTNING 3D Pro Series II

Overview

Digital Projection International (DPI), Texas Instruments’ first DLP™ partner and the original innovator of the 3-chip DLP™ projector, proudly introduces the LIGHTNING 1080p 3D family.

Each new LIGHTNING 3D model employs the latest in dark chip, 3-chip DLP™ technology,

and include DPI’s exceptional RapidRig™ staging and stacking hardware with integrated pitch, roll and yaw adjustments. When considered along with their 10,000 - 30,000 ANSI

lumen brightness and contrast performance up to 4000:1, the LIGHTNING 3D models are

the perfect imaging solutions for the most demanding large screen immersive applications, including: military simulation, scientific visualization, medical, chemical and geological research, product engineering, commercial cinema and theme park attractions.

In addition to the active 3D capability, the LIGHTNING 3D models also include DP’s new

FastFrame™ technology, a revolutionary combination of hardware and firmware that vastly reduces the artifacts and image blur typically associated with rapidly moving displayed content. The benefits of FastFrame™ are especially important for simulation environments such as commercial and military flight training, and other applications where maintaining the visual integrity of high-speed imagery is vital.

The LIGHTNING 1080p 3D projectors also incorporate DPI’s Hyper-Cooled lamp module,

one of our CoolTek™ innovations. Engineered with a proprietary, directional-flow reflector mask and radial heat exchanger, the Hyper-Cooled module dramatically improves projector thermal characteristics and extends reflector life and lumen maintenance. In turn, these operating benefits provide a significant reduction to the long-term cost of ownership, while also enhancing component reliability.

Other key benefits of the LIGHTNING 1080p 3D products include:

• High Bandwidth input >120Hz active stereoscopic DVI with no need for frame doubling. This capability extends the dynamic range up to 16 bit for improved

contrast and color gamut. Both single-pipe and dual-pipe 3D sources are supported.

• Dual Flash Processing™(DFP) – Supports users wishing to distribute 3D content via more traditional, 60 Hz formats with the option to frame-double their sources within

the projector, via DFP. When this option is selected, the input signal, having been

processed and if necessary re-sized to map to the native resolution of the projector, will also be frame-doubled to 120 Hz, and the doubled frames interleaved. This produces imagery with the low flicker characteristics of a native 120 Hz source,

but without the infrastructure costs associated with distributing and switching ultra-high bandwidth signals.

• Projector electronics which provide an interface to drive an infrared transmitter to synchronize switching glasses with active displayed frames. The user can elect

either to pass through an external synch pulse, or to use the reference generated internally by the projector. Adjustments are provided to accommodate the phase and dead time characteristics of different switching glasses.

• FastFrame™ technology, a revolutionary combination of hardware and firmware

that provides user adjustments to vastly reduce the artifacts and image blur typically associated with rapidly moving display content.

• DP’s NextGen electronics with class leading video de-interlacing. SD and HD

sources are processed using auto 3:2 and 2:2 extraction.

• Minimal video delay from input to screen - as low as 1 frame, depending on source.

• High bandwidth DVI inputs offer Single, Twin, Dual & Dual Twin DVI connectivity.

• ColorMax calibration capabilities, including enhanced seven-point color correction

for broader color space and accurate color alignment.

• DP’s CoolTek™ engineering, which delivers the highest lumen performance with the lowest thermal (BTU) and noise level (dB) output.

• MultiBlend™ – an advanced soft-edge capability for seamlessly meshing arrays of

projectors to create displays with ultra-high resolution or unusual aspect ratios.

• Intelligent Lens Mount (ILM) - provides the ability for the user to program up to 10 distinct presets for lens zoom, focus and shift. The ILM presets can be assigned and

automatically recalled, by source and input.

LIGHTNING 1080p 3D Pro Series II projectors - ultra-powerful display systems for major

3D events and Immersive large screen applications - bringing the precision of Digital Projection to every venue.

INPUT CAPABILITIES

Type

Composite

S-Video

Component

Interlaced/Std def Y, Cr/Pr, Cb/Pb, S Graphics

Progressive RGB/Progressive Interlaced Hi def Y, Cr/Pr, Cb/PB

RGBHV (Progressive) Digital RGB

Serial Digital

SD/HD-SDI (SMPTE 259M/292M) DVI - High bandwidth

Dual - main Dual - sub

*The main & sub dual DVI inputs can be used in parallel to support dual-pipe 3D connectivity

Connector

BNC

4-pin mini DIN

BNCx4

BNCx5

D sub (15-pin)

DVI

BNC

DVI DVI

Quantity

1 1

LIGHTNING 3D Pro Series II

CORE TECHNOLOGY

Projector Dimensions

Without Frame

Projector dimensions (in)

L1 40.5 W1 28.5 H1 19.5

Projector dimensions (mm) L1 1028 W1 728 H1 495

ADVANCED TECHNICAL SPECIFICATIONS

PARAMETERS

With Frame

Projector dimensions (in) L2 43.4 W2 28.1 H2 20.5

Projector dimensions (mm) L2 1116 W2 714 H2 522

LIGHTNING 38-1080p 3D Back Panel

Native Color Temperature

HDTV Formats Supported

Scan Rates Supported

Remote Control

1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p

Inputs 1-7: Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz - Input 8: 3D progressive 576p up to 1080p @ 120Hz

Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad

Automation Control

Operating/Storage Temperature

Operating Humidity

Thermal Dissipation

13,640 BTU/hour maximum 15,695 BTU/hour maximum

Fan Noise

Power Requirements

Power Consumption

4000 watts maximum 4600 watts maximum

Projectors Part #

LIGHTNING 38-1080p 3D (USA) 110-668 LIGHTNING 38-1080p 3D (ROW) 110-669 LIGHTNING 38-1080p 3D Ultra Contrast (USA) 110-671 LIGHTNING 38-1080p 3D Ultra Contrast (ROW) 110-672

Lenses HB Part #

0.67:1 105-607

1.12:1 105-608

1.12:1 (short) 105-609

1.16-1.49:1 109-236

1.39 - 1.87:1 105-610

1.87 - 2.56:1 105-611

2.56 - 4.16:1 105-612

4.16 - 6.96:1 105-613

6.92-10.36:1 109-235

6,000°K ±500°K; white balance-adjustment: 3,000°K to 10,000°K

LAN connection via RJ45 / RS232 9-pin D type

Operating: 0 to 35°C / Storage: -10 to 50°C /

20 to 80% non-condensing

Less than 59dBA

208-240 VAC, 50/60Hz single phase

Accessories Part #

LIGHTNING Lamp & Housing - Hypercooled 103-238 LIGHTNING Refurb Lamp & Housing - Hypercooled 103-238R Lamp Exchange 103-238E LIGHTNING Lamp & Housing - Hypercooled 104-578 LIGHTNING Refurb Lamp & Housing - Hypercooled 104-578R Lamp Exchange 104-578E

Infrared Remote (Replacement) 105-023

1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life. See Digital Projection’s Product Warranty Statement for details on lamp warranty.

DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com

DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk

DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770

DIGITAL PROJECTION, ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238