L1 1035 H1 438 W1 745
L2 1125 H2 481 W2 15
L3 154 H3 505 W3 140
L4 790 H4 178 W4 465
Projector dimensions (mm)
Technical Specification
To allow maximum flexibility, whatever
the application, Digital Projection
developed a Motorised Lens Mount,
capable of providing extensive vertical
and horizontal lens shift.When combined
with our broad and flexible range of
lens options and system accessories,
LIGHTNING Displays can be mechanically
integrated into virtually any application.
Design simplicity is underlined by the
remarkable alignment stability of
LIGHTNING Displays. Factory preset
convergence, exacting and stable colour
reproduction, digitally accurate image
uniformity and user friendly on-screen
menus ensure simple and confident
setup and minimal maintenance, for
even the most challenging large-screen
applications.
Design flexibility in, complexity out...
Specifications and descriptions,
however, cannot tell the full story. The
only way to appreciate the marvellous
image quality of a LIGHTNING Display is
to see one in action; the only way to
appreciate its flexibility, stability
and ease of use is to experience
one performing in your application.
Whatever your display requirements.
By providing a combination of
stunning imagery, installation flexibility
and the highest levels of customer
service, Digital Projection puts the
power in your hands.
Seeing is Believing...
Brightness
12,000 ANSI Lumens (±10%)
Brightness Linearity
>90% edge to centre
Colour Temperature
3000°K - 9300°K Adjustable
Contrast Ratio
275:1 ANSI Checkerboard (±10%)
500:1 Full Field (±10%)
Display Type
3 x DMD (one per R, G & B)
DMD Specification
1280 x 1024 pixel
16.3µm x 16.3µm pixel size
17µm x 17µm pixel pitch
21.8mm x 17.4mm DMD size
Fill Factor
92% pixel fill factor
Input Specification
3 independently configurable inputs selectable via remote control. BNC
connectors. 525/60, 625/50, PAL,NTSC,
HDTV, VGA, SVGA, XGA, SXGA & MAC
Serial Digital Input (standard)
RGBS
RGB = 700mV/75Ω, S=0.7V-5V, Sync
on G separate H & V Composite Sync
Auto Select
Component Video
Y=700mV +300mV/75Ω
Pr, Pb=700mVp-p/75Ω
Y/C (S video)
Y=700mV + 300mV/75Ω
C=300mV p-p/75Ω
Composite
1Vp-p/75Ω-Advanced video decoding
by Faroudja Laboratories
Computer
H = 15kHz to 90kHz
V = 24Hz to 100Hz
Remote Control
IR Receivers front and rear. Hard wire
link to handset 9 pin D type connector
Automation
RS232 input/output loop-through,
9 pin D type
Switcher
Video switcher output-RS232
9 Pin D type
Lamp Type
Xenon Arc, Bubble
Mounting
Floor Mount (standard)
Flying Frame (optional)
Rigging Frame (optional)
Stacking Frame (optional)
Lens Mount
Motorised and programmable focus,
zoom, horizontal and vertical lens
shift accessed via remote control,
light shutter
Lens Options
SX Lens
1.2:1 Fixed
1.5 - 2.0:1 Zoom
2.0 - 2.5:1 Zoom
2.5 - 4.0:1 Zoom
4.0 - 7.0:1 Zoom
*GV Lens (Sleeve adapter required)
1.5 - 2.5:1 Zoom (actual 1.2 - 2.0:1)
2.5 - 4.0:1 Zoom (actual 2.0 - 3.2:1)
7.0 - 15.0:1 Zoom (actual 5.6 - 12.0:1)
*Caution Note. Please refer to
Technical Bulletin 1.00.014 before use.
Physical Dimensions
481mm (19") height
745mm (29") width
1125mm (44") length
Weight
(chassis only) 95 kg (210 lbs)
Power Requirements
208-240 V ac 50-60 Hz, 4200 watts
Digital Projection Ltd.
Greenside Way, Middleton
Manchester UK
M24 1XX
T. +44 (0) 161 947 3300
F. +44 (0) 161 684 7674
E. enquiries@digitalprojection.co.uk
W. www.digitalprojection.co.uk