Digital Projection iVision HD-7, iVision HD-X Product Sheet

PERFORMANCE SPECIFICATIONS

Brightness (±10%) sx+: 2,500 ANSI lumens HD-7: 1,000 ANSI lumens HD-X: 500-1,000 ANSI lumens

(user adjustable)

Contrast Ratio (full on/full off) sx+: 2000:1 HD-7: 3000:1 HD-X: 4000:1

Display Type

sx+: DarkChip2™ DMD HD-7: DarkChip2™ DMD HD-X: DarkChip3™ DMD

Sequential Color Management

sx+: four segment color wheel HD-7: seven segment color wheel HD-X: seven segment color wheel

Native Resolution

sx+: 1400 x 1050 pixels HD-7: 1280 x 720 pixels HD-X: 1280 x 720 pixels

Computer Compatibility

Up to 1600 x 1200

Video Compatibility

HDTV, NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM; HDCP on DVI; Faroudja™ deinterlacing with automatic film mode detection (3:2 and 2:2 pulldown)

Aspect Ratio (native) sx+: 4x3 HD-7: 16x9 HD-X: 16x9

Bandwidth (up to) 205 MHz on analog RGB 160 MHz on DVI 75 MHz on component input

Throw Ratio

sx+: 1.75-2.2:1 (with standard lens)

1.0:1 (with opt. wide angle lens) HD-7 &1.75-2.25:1 (with standard lens) HD-X: 1.0:1 (with opt. wide angle lens)

2.5-3.5:1 (with opt. long zoom lens)

Throw Distance

1.5-10 meters (5-33ft)

Image Size

0.7-5.5 meters (2.5-18ft) wide

Image Offset

sx+: 8% HD-7 / HD-X: 16%

Lamp Type

250W UHP™

Lamp Life

2,000 hours-lamp high (typical) 4,000 hours-lamp low (typical)

Mechanical Mounting

Front/rear table Front/rear ceiling Adjustable front/rear feet

Operating Noise Level

28dB

Dimensions (chassis only)

9.6in(L) x 10.9in(W) x 3.5in(H) 244mm(L) x 278mm(W) x 88mm(H)

Weight (chassis only) 3kg (6.5lbs)

Standard Accessories

(sx+ only) Ceiling mount cable cover

Cabinet Color

sx+ / HD-7: grey - standard

white - optional

HD-X: Piano black - standard

white - optional

SX+ • HD-7 • HD-X

Digital Projection International proudly offers the iVision series, ultra-quiet, compact projectors based on single-chip DLP™ technology. The iVision sx+ employs an SXGA+ native resolution DMD™, producing up to 2,500 ANSI lumens and 2000:1 contrast. The iVision HD-7 and HD-X employ a DMD™ with 1280 x 720 pixels and respectively produce stunning 3000:1 and 4000:1 contrast through 1,000 ANSI lumens. These cost-effective projectors bring the extraordinary performance and imaging expertise of Digital Projection within reach of every application.

The iVisions’ intuitive user controls and extensive source compatibility render them simple to integrate, control and operate. The projectors’ low-cost, long-life UHP™ lamp system and inherent digital stability position the iVision series as perfect projection solutions for a diverse range of customers and applications, including:

•Dramatic home entertainment

•Digital media and advertising

•Corporate boardrooms and teleconferencing suites

•Training and education

•Retail and entertainment

•Religious venues/houses of worship

• Casinos and hospitality

•Military simulation/command and control

•Immersive visualization

As is the case with all Digital Projection displays, our careful engineering guarantees iVision displays provide remarkable imaging and reliability for the long-term. Equally important, our legacy in superior customer and technical services assures our experienced support staff is always available to address your needs.

The iVision sx+, iVision HD-7 and iVision HD-X — ultra-compact, awe-inspiring displays—bringing the precision of Digital Projection to every venue.

™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.

INPUT / OUTPUT CAPABILITIES

Input

VGA/analog RGB

DVI (Digital RGB)

Component Video (SDTV/HDTV)

S-Video

Composite VIdeo

USB for mouse connection and firmware upgrade

LAN

Stereo mini jack audio

Screen trigger

Outputs

VGA monitor out

Stereo mini jack audio

* Four audio inputs on stereo mini plugs for sources listed above 1 See Digital Projection’s Product Warranty Statement for details on lamp warranty

Connector

D Sub (15-pin)

DVI-D

RCAx3

4-pin mini DIN

RCA

USB

RJ45

D Sub (15-pin)

Quantity

SX+ HD-7/HD-X

1 n/a

n/a 1

1 n/a

DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD. SUITE 115. KENNESAW. GA. 30144 • T-770.420.1350 • F-770.420.1360 • www.digitalprojection.com DIGITAL PROJECTION, LTD. • GREENSIDE WAY. MIDDLETON. MANCHESTER. UK. M24 IXX • T-+44.161.947.3300 • F-+44.161.684.7674 • www.digitalprojection.co.uk

Projector dimensions (mm)

W1 278 H1 88 L1 244

Projector dimensions (in)

W1 10.9 H1 3.5 L1 9.6

HDTV Formats Supported

Scan Rates Supported

Remote Control

Automation Control

Operating/Storage Temperature

Operating Humidity

Thermal Dissipation

Fan Noise

Power Requirements

Power Consumption

Safety and EMC Regulations

ADVANCED TECHNICAL SPECIFICATIONS

PARAMETERS

1080i, 720p, 576i/p, 480i, 480p

Horizontal: 120kHz; Vertical: 50-110Hz

Remote wireless IR

RS232 9-pin D sub / RJ45 LAN

Operating: 0 to 40°C at 0-1500m, 0 to 35°C at 1500-3000m / Storage: -10 to 45°C

20 to 90% RH

1300 BTU

28dB at 20°C (68°F)

90-260 VAC, 50/60Hz

350W

UL, CE, FCC Class A

iVision sx+ -includes 1.75-2.2:1 lens

iVision sx+W -includes 1.0:1 lens

iVision HD-7 -includes 1.75-2.25:1 lens

iVision HD-7W -includes 1.0:1 lens

iVision HD-7L -includes 2.5-3.5:1 lens

iVision HD-X -includes 1.75-2.2:1 lens

iVision HD-XW -includes 1.0:1 lens

iVision HD-XL -includes 2.5-3.5:1 lens

Replacement lamp module

Low profile ceiling mount

Adjustable ceiling mount

Infrared remote

(replacement for sx+)

Infrared remote (replacement for HD-7 and HD-X)

PROJECTORS

PART NO.

103-735

103-736

103-976

103-977

103-978

104-694

104-695

104-696

001-821

001-822

102-543

104-142

001-944

iVision HD-7 back panel

ACCESSORIES

PART NO.

iVision sx+ back panel