Digital Projection iVision 20 HD-W Product Sheet

Brightness (±10%)

sx+: 2,500 ANSI lumens HD : 1,200 ANSI lumens

Contrast Ratio (full on/full off)

sx+: 2500:1 HD : 4000:1

Display Type

sx+: .95” DarkChip3™ DMD HD : .8” DarkChip3™ DMD

Sequential Color Management

sx+: four segment color wheel HD : seven segment color wheel

Native Resolution

sx+: 1400 x 1050 pixels HD : 1280 x 720 pixels

Computer Compatibility

Up to 1920 x 1080

Video Compatibility

sx+ / HD : HDTV 1080p, 1080i, 720p, EDTV 576p, 576i, 480p, 480i, NTSC, PAL, SECAM

Aspect Ratio (native)

sx+: 4x3 HD : 16x9

Bandwidth (up to)

205 MHz on analog RGB 160 MHz on DVI 75 MHz on component input

Throw Ratio

sx+: 1.7-2.2:1 sx+ W: 1.0:1 HD : 1.85-2.4:1 HD-W: 1.09:1

Throw Distance

1.5-10 meters (5-33ft)

Image Size

sx+: 0.5 - 20 meters (2 - 15ft) wide HD : 0.5 - 7 meters (2 - 15ft) wide

Lens Shift

sx+: + .5 frame, - .0 frame vertical HD : + .6 frame, - .0 frame vertical

Lamp Type

220W UHP™

Lamp Life (Typical)

4,000 hours (economy mode) 2,000 hours (normal mode)

Mechanical Mounting

Front/rear table Front/rear ceiling Adjustable front/rear feet

Operating Noise Level

<30db

Dimensions (chassis only)

9.2in(L) x 10.9in(W) x 3.7in(H) 234mm(L) x 278mm(W) x 94mm(H)

Weight (chassis only)

2.55kg (6lbs)

Standard Accessories

IR remote control, cable cover

Cabinet Color

sx+ / HD: Graphite - standard

Grey - optional Glossy Black - optional

20SX+ • 20HD

Digital Projection International proudly introduces the second generation of our compact single-chip DLP displays - the iVision 20 series. The iVision 20HD and 20sx+ embody the most compact and ultra-quiet implementation of DarkChip3

single-chip DLP technology available today. The iVision 20sx+ employs an SXGA+ native resolution DMD, producing up to 2,500 ANSI lumens and 2500:1 contrast. The iVision 20HD employs a DMD with 1280 x 720 pixels and produces stunning 4000:1 contrast through 1,200 ANSI lumens. These cost-effective projectors bring the extraordinary performance and imaging expertise of Digital Projection within reach of every application.

The iVision 20's intuitive user interface and extensive source compatibility render them simple to integrate, control and operate. These new iVision's feature an onaxis optical design, supported by a geometrically precise zoom lens. Vertical lens shift with more than a full frame of shift range provides maximum installation flexibility. The projectors' low-cost, ultra efficient UHP lamp system and inherent digital stability position the iVision 20 series as best-in-class projection solutions for a diverse range of customers and applications, including:

• Dramatic home entertainment

• Digital media and advertising

• Corporate boardrooms and

teleconferencing suites

• Training and education

• Retail and entertainment

• Religious venues/houses of worship

• Casinos and hospitality

• Military simulation/command and control

• Immersive visualization

As is the case with all Digital Projection displays, our careful engineering guarantees the iVision 20 series provide remarkable imaging and reliability for the longterm. Equally important, our legacy in superior customer and technical services assures our experienced support staff is always available to address your needs.

™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.

INPUT CAPABILITIES

PERFORMANCE SPECIFICATIONS

Input Connector Quantity

VGA/analog RGB D Sub (15-pin) 1

DVI (Digital RGB) DVI-D 1

Component Video RCA x 3 1 (SDTV/HDTV)

S-Video 4-pin mini DIN 1

Composite VIdeo RCA 1

Control & Integration:

USB for mouse connection USB 1 and firmware upgrade

LAN RJ45 1

Screen trigger mini jack 1

Aspect ratio trigger

(HD only) mini jack 1

Audio / Speaker input

(sx+ only) stereo mini jack 1

DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD. SUITE 115. KENNESAW. GA. 30144 • T-770.420.1350 • F-770.420.1360 • www.digitalprojection.com DIGITAL PROJECTION, LTD. • GREENSIDE WAY. MIDDLETON. MANCHESTER. UK. M24 IXX • T-+44.161.947.3300 • F-+44.161.684.7674 • www.digitalprojection.co.uk

Projector dimensions (mm)

W1 278 H1 94 L1 234

Projector dimensions (in)

W1 10.9 H1 3.7 L1 9.2

HDTV Formats Supported

Scan Rates Supported

Remote Control

Automation Control

Operating/Storage Temperature

Operating Humidity

Thermal Dissipation

Fan Noise

Power Requirements

Power Consumption

Safety and EMC Regulations

ADVANCED TECHNICAL SPECIFICATIONS

PARAMETERS

1080p,1080i, 720p, 576i, 576p, 480i, 480p

Horizontal: 120kHz; Vertical: 50-110Hz

Remote wireless IR

TCP/IP on LAN / RS-232 / USB

Operating: 0 to 40°C at 0-1500m, 0 to 35°C at 1500-3000m / Storage: -10 to 45°C

20 to 90% RH

1300 BTU

<30 db

100-240 VAC, 50/60Hz, +/- 10%

350W

CE, UL, cUL, FCC Class B

iVision 20sx+ -includes 1.7-2.2:1 lens

iVision 20sx+ W -includes 1.0:1 fixed lens

iVision 20HD -includes 1.85-2.4:1 lens

iVision 20HD-W -includes 1.09:1 fixed lens

Replacement lamp module

Low profile ceiling mount

Adjustable ceiling mount

Infrared remote

(replacement for 20sx+ & 20HD)

PROJECTORS

PART NO.

105-489

106-187

105-488

106-380

105-495

001-822

102-543

105-494

iVision 20 back panel

ACCESSORIES

PART NO.

preliminary specifications

1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life.

See Digital Projection’s Product Warranty Statement for details on lamp warranty.