Digital Projection INSIGHT 4K Quad Product Sheet

Specification Sheet

INSIGHT 4K Quad Lamp (Preliminary)

25,000 ANSI Lumens | Contrast Ratio: 2000:1 | Part No:115-900

Colour System: DMD Specification:

3-chip DLP®

Display Type:

3 x 1.38" DarkChip™ DMD™

4096 x 2160 pixels native.
Fast transit pixels for smooth greyscale and improved contrast.

Aspect Ratio:

1.90:1

Fill Factor

87%

Key Features

Video & Graphics Processing

Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)
3D Capable
Scaling of HDMI 1.4 formats to fill the 4K display
Dark Time insertion capability
HDMI 1.4b up to 3840 x 2160 at 30 fps.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
Synchronisation of active glasses or polarising switcher.

Color adjustments

Up to 12 bits per color processing (depending on source and input type).
Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display.
Individual R, G & B lift and gain.
Black and White level adjustment via Brightness & Contrast control.
Degamma selection from a list of parametric curves.

ColorMax™

Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary user defined color targets up to 7 points.

3D Functionality

Full 4K 3D display capability
Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames.
Synchronisation of active glasses or polarising switcher.
Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses
and polarizers.

Projector Control

Keypad.
Wired remote control.
Network control via RJ45 and protocol.
Group Controller Application

Source Compatibility:

Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI.

Inputs/Outputs

Video & Computer
Type Connector Qty

DisplayPort 1.2
HDMI 1.4

DisplayPort
HDMI

2
2

Communication & Control
Type Connector Qty

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Infra-Red

BNC
BNC
RJ45
9-pin D Sub

3.5mm Stereo Jack
Front and Rear IR
Receivers

3D Formats Supported HDTV Formats Supported

Frame Packing (Q4 2015)
Dual Pipe (Q4 2015)
Frame Sequential

4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)

1080p (24, 25, 30, 50, 59.94, 60 Hz)
Side By Side (half) (Q4 2015)
Top and Bottom (Q4 2015)

Computer Compatibility Bandwidth

Up to 4096 x 2160 N/A

Remote Control Automation Control

Wired remote control
On-Board keypad

RS232

LAN
Colour Temperature

Adjustable

Lamp Type Typical Lamp Life

4 x 465W High Intensity Discharge Full Power: 1500 hours (up to 6000 hours in lamp

sequential mode) Eco Mode : 2000 hours (up to 8000

hours in lamp sequential mode)

1
1
1
1
1
2

Lenses
Lens Part No. Focus Range Lens Shift

0.93:1 fixed

1.13 - 1.72:1 zoom

1.65 - 2.60:1 zoom

2.53 - 4.98:1 zoom

116-087
115-627
115-630
115-632

0.5m - 100m 2.5m - 100m 3.5m - 100m 4.5m - 100m Vert: 0.210 (U) 0.210 (D) frame, Hor: 0.08 (L) 0.08 (R)
frame
Vert: 0.340 (U) 0.190 (D) frame, Hor: 0.09 (L) 0.09 (R)
frame
Vert: 0.400 (U) 0.200 (D) frame, Hor: 0.13 (L) 0.13 (R)
frame
Vert: 0.375 (U) 0.200 (D) frame, Hor: 0.13 (L) 0.13 (R)
frame

Lens Mount

Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions.

Mechanical Mounting Orientation

Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and

Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: No
Roll (Portrait): No

yaw adjustments.

Power Requirements Power Consumption

200-240VAC 50/60Hz single phase 2100WW

Thermal Dissipation Fan Noise

7165 BTU/Hour BTU/Hour 48 dBA