Digital Projection HIGHlite Laser 4K Product Sheet
Specification Sheet
HIGHlite Laser 4K
11,000 ANSI / 12,500 ISO Lumens | Contrast Ratio: 2,000:1 | Part No:118-081
Colour System: DMD Specification:
3-chip DLP®
Display Type:
3 x 0.65" 1080p DMD™
Display capability up to 4K-UHD. 8.3 megapixels on screen at 4K-UHD (3840 x 2160). Fast
transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16:9
Fill Factor
Not applicable: Smooth Picture DMD™
Key Features
Environmental
Sealed Optics
Filterless
Dust Resistant
Video & Graphics Processing
HDR processing
DisplayPort 1.2.
2 x HDMI 2.0.
HDBase-T.
3G-SDI with loop-through.
Scaling with aspect ratio management for a wide range of sources.
DICOM simulation mode.
Geometry Correction
Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.
Non-linear warp.
Digital zoom, pan and scan.
Blanking control for custom input window sizing.
Scaling available for fixed aspect ratio screens.
Unscaled processing for pixel mapped display.
Edge Blending
Blending control available for all sides with width control.
Correction for non-active pixels at the edge of the display.
Picture in Picture
Two sources can be displayed simultaneously using 2D inputs: either picture in picture (PIP), or side by side
(PBP), with original aspect ratios maintained.
HDBaseT® Interface
Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows the projector to be placed up to 100m from the source with low cost cabling.
Supports up to 4K UHD 3840x2160 @ 60Hz (4:2:0) / 8-bit 3840x2160 @ 30Hz (4:4:4) / 8-bit 3840x2160 @
30Hz (4:2:2) / 12-bit
Colour Processing
Four colour modes available.
Powerful seven point colour correction for accurate colour matching with presets.
Easy colour temperature selection.
Manual seven point colour adjustment.
Traditional lifts and gains.
Projector Controller Software
Intuitive user interface for network control.
Simultaneous control of user-defined groups of projectors.
At-a-glance monitoring of projector status.
Projector Automation
Real-time clock provides daily on/off automation.
E-mail alerts for system status.
Source Compatibility:
2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0) and DisplayPort
inputs.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant upto 1080p.
Inputs/Outputs
Video & Computer
Type Connector Qty
DisplayPort 1.2
HDMI 2.0
3G-SDI In
3G-SDI Out
HDBaseT/LAN
DisplayPort
HDMI
BNC
BNC
LAN RJ45
1
2
1
1
1
Communication & Control
Type Connector Qty
LAN
RS232
Wired Remote
12V Trigger
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
3D Formats Supported HDTV Formats Supported
Not applicable 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
1080i (50Hz, 60Hz)
720p (50Hz, 60Hz)
2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
Computer Compatibility Bandwidth
2D
498 Megapixels per second via DisplayPort and HDMI 2.0.
4K-UHD up to 60Hz
Remote Control Automation Control
Addressable IR remote control, wireless and wired.
On-Board keypad.
Crestron Room View® Connected
PJ Link Class 1
LAN
RS232
AMX (Device Discovery)
Served web pages (Projector status, Projector control,
Crestron RoomView®, Network settings, Alert mail setup,
Time setup, Error log, On screen Display )
Colour Temperature
3200K to 9300K
Lamp Type Typical Lamp Life
Laser Light Source 20,000 hours
1
1
1
2
Lenses
Lens Part No. Focus Range Lens Shift
0.77 : 1 fixed HB
1.16 : 1 fixed HB
1.45 - 1.74 : 1 zoom HB
1.74 - 2.17 : 1 zoom HB
2.17 - 2.90 : 1 zoom HB
2.90 - 4.34 : 1 zoom HB
4.34 - 6.76 : 1 zoom HB
110-808
110-809
110-803
112-878
113-852
110-806
110-807
1.3m - 15.0m
1.4m - 25.0m
1.8m - 9.3m
2.2m - 11.8m
2.7m - 15.4m
3.6m - 22.5m
5.5m - 35m
Vert: 0.38 (U) 0.38 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
Vert: 0.38 (U) 0.38 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more
details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/2%, INSIGHT Series: +/-2%,
Lens Mount
Loading...