Digital Noise Reduction STAR LIGHT ES-6030ESHDV23712, STAR LIGHT ES-6030SHDVM23012, STAR LIGHT ES-6030SHCVM23012 Operating Manual

STAR LIGHT SERIES VANDAL PROOF DOME

ES-6030ESHDV23712
ES-6030SHDVM23012
ES-6030SHCVM23012

OPERATING MANUAL

Warning: To prevent fire or electric shock hazard, do not expose

the appliance to rain or moisture

Star Light IR Vandal Proof

Dome

Star Light Vandal Proof Dome

-2 -

General

The vandal dome series offers a complete range from basic 420TVL varifocal
type to the flagship model that comes in 540TVL, DNR function and built in IR
LEDs with ICR D/N varifocal lens. The sophisticated mechanical design
enhanced the accessibility and conveniency in terms of installation. Sturdy and
IP66 enclosure ensures the camera to stay in best condition even under most
critical environment

This color CCD video camera employs a 1/3 inch charge coupled device
solid-state imaging device with 470/410 k or 310/270k picture elements, This
unit is equipped with a newly developed DNR DSP (Digital Signal Processor)
for processing the video signal.

The DNR function is a newly developed technology which suppressed all
significant noise while AGC is activated. So the camera is able to deliver
smooth and more even noise picture that enhanced readability and saved
video signal transmission traffic

Features(Day and Night ICR Series)

*420/540TV Lines resolution, providing fine, crisp and vivid high-resolution

image

* Advanced digital noise reduction deliver low noise image under low lux

environment

* ICR D/N switching mechanism allows changing between color and

monochrome

* ICR D/N mode to work correctly with daytime (visible light) and nighttime

(invisible light)

* IR accuracy: vivid color performance in the daytime and sharp B/W image

with no focus shift in the nighttime

* Infrared light sensing responses wavelength from 700 to 1100nm

* Outstanding artwork & mechanism design, suitable for all installation

environments

* Heavy-duty, weather & vandal proof IP66

* Selectable lenses providing a wide range selection for different viewing

applications

* Built-in horizontal/ vertical adjusting mechanism for multi-dimensional

adjustment

* Advanced wide range Auto Tracing White Balance (ATW), automatically

adjusts the white balance according to the color temperature in the

environment

* Smart digital control Auto Back Light Compensation (BLC)

* Dynamic spherical Vari-focal A.I lens option to deliver sharp resolution

-3 -

* Simple & quick combination providing user-friendly installation &

maintenance

* Special design distortion-free acrylic vandal dome cover

* Outstanding signal to noise ratio better than 50dB

* Low power consumption and DC 12v AC 24V auto switching

Features(Standard Series)

* 420/540TV Lines resolution, providing fine, crisp and vivid high-resolution

image

* Advanced digital noise reduction deliver low noise image under low lux

environment

* Smart Optical Low Pass Filter (OLPF) switching mechanism allows changing

between color and monochrome

* D/N OLPF mode to work correctly with daytime (visible light) and nighttime

(invisible light)

* IR accuracy: vivid color performance in the daytime and sharp B/W image

with no focus shift in the nighttime

* Infrared light sensing responses wavelength from 700 to 1100nm

* Outstanding artwork & mechanism design, suitable for all installation

environments

* Heavy-duty, weather & vandal proof IP66

* Selectable lenses providing a wide range selection for different viewing

applications

* Built-in horizontal/ vertical adjusting mechanism for multi-dimensional

adjustment* Advanced wide range Auto Tracing White Balance (ATW),

automatically adjusts the white balance according to the color temperature in

the environment

* Smart digital control Auto Back Light Compensation (BLC)

* Dynamic spherical Vari-focal A.I lens option to deliver sharp resolution

* Simple & quick combination providing user-friendly installation &

maintenance

* Special design distortion-free acrylic vandal dome cover

* Outstanding signal to noise ratio better than 50dB

* Low power consumption and DC 12v AC 24V auto switching

-4 -

A

Name of Parts and Functions

A

B

C

D

E

F

I

G

G

J

H

-5 -

10
9
8
7
6
5
4
3
2
1

SENS-UP
IR ON
VIDEO
OFF
OFF
BLC OFF
ATW
AGC
AE
A.IRIS

OFF
OFF
COLOR
V-MIR
H-MIR
ON
AWB
OFF
FL
AE

7
6
5
4
3
2
1

SENS-UP
OFF
OFF
BLC OFF
ATW
AGC
A.IRIS

OFF
V-MIR
H-MIR
ON
AWB
OFF
AE

A. Camera

B. Bracket

C. Bottom housing

D. Vari-focal lens

E. Safety string

F. Upper housing

G. Screw hole

H. Cable hole

I. Led board

J. Control board

I. Power source: AC24V/DC12V (Non-polarity)Block Terminal

II. Video out

III. DC auto iris level adjustment

Adjusting DC drive auto iris lens driving level for
obtaining correct exposure light.

IV. RCA Video out

Installation Procedure

Step 1: Removing dome cover

Remove dome cover from the main body by

loosening the four dome cover mounting

screws.

The dome cover is fixed with tamperproof

screw. Loosen the four dome cover mounting

screws by using the supplied bit for

tamperproof screw.

Ⅲ

Ⅲ

Ⅳ

Ⅳ

Ⅰ

Ⅱ

Ⅰ

Ⅱ

Day and Night ICR Series

Standard Series

-6 -

Step 2: Securing camera

Place mounting plate at position which the camera will be mounted and fix the
screw holder and then screw ∮4*26mm screws *4

Step 3: Cable arrangement

The right side

connection

should be

made by

qualified

service person

or system

installers. It is necessary to make sure that the cable hole has been protected

with waterproof installation process when the cable connect from the side by

metal pipe which is G1/2 format

Step 4: Adjust 3 Axes bracket while checking video from monitor

Installation friendly, allowing

service persons to check video

performance by simply

connecting a LCD monitor to

RCA jack

Loosen the tilt screw and then adjust the 3 Axis

bracket to get what position will you monitor

Mounting

∮4*26 screws *4

-7 -

Three axes mechanical

design allows 90° side views

for wall mount and furthest

angle for ceiling mount when

guarding a hall way.

Horizontal angle adjustment – by turning the platform to adjust the horizontal

angle180 degrees:360 degrees

Vertical angle adjustment – by turning the platforms to adjust the vertical

angle: 90 degrees

Step 5: Focus adjustment

Focus adjustment should be done with Step 4 at the

same time

The default setting for zoom position is WIDE

z Standard series focus adjustment

 Loosen the zoom ring thumbscrew.

 Turn the zoom ring to set to the desired

zoom.

 Tighten the zoom ring thumbscrew.

 Loosen the focus ring thumbscrew.

 Turn the focus ring to set to the desired

focus.

 Tighten the focus ring thumbscrew.

z Day and Night ICR focus adjustment

 Loosen the zoom ring

thumbscrew.

 Turn the zoom ring to set to

the desired zoom.

 Tighten the zoom ring

thumbscrew.

 Use the screw driver to loosen

the focus ring thumbscrew.

 Turn the IR LED board to set

to the desired focus.

 Use screw driver to tighten the

focus ring thumbscrew

Zoom ring Screw

Focus screw

-8 -

10
9
8
7
6
5
4
3
2
1

SENS-UP
IR ON
VIDEO
OFF
OFF
BLC OFF
ATW
AGC
AE
A.IRIS

OFF
OFF
COLOR
V-MIR
H-MIR
ON
AWB
OFF
FL
AE

7
6
5
4
3
2
1

SENS-UP
OFF
OFF
BLC OFF
ATW
AGC
A.IRIS

OFF
V-MIR
H-MIR
ON
AWB
OFF
AE

Step 6: Auto iris level adjustment

If using DC type auto-iris lens, you

will need to set the level volume

when shooting in the condition

described below.

z If shooting simultaneously in

a dark room and through a

bright window

z If the subject background is

extremely bright or dark

z If the brightness of the picture

on the monitor is not correct

L (counterclockwise): To decrease the contrast

H(clockwise): To increase the contrast

Step 7: Function Setting

You can select the function according your condition the function description

please check below topic

Please check picture at right for factory default values whenever a camera

needs to be set to default again during installations

Day and Night ICR Series

Standard Series

-9 -

Step 8: Reinstall the dome cover to the
main body by tighten four dome cover
mounting screws

Auto Iris and AES Adjusting

If you would use Auto Electronic Shutter, please select this mode to control

exposure with the electronic shutter. The range of shutter speed is from 1/50

(1/60) set to 1/100,000 sec.

If you are using an auto iris lens, please select this mode, In this mode, the

shutter speed is fixed to 1/60 sec. for NTSC and 1/50 sec. for PAL.

Flickerless Function Adjusting

If camera is installed into different frequency, the flickerless function will reduce

the flicker of video. The shutter of NTSC is 1/100; shutter of PAL is 1/120.

When dip the switch at AES/FL side, the shutter will stay at Flickerless

situation.

Super AGC

If you are to install the camera for low lux environment, by switching to SAGC,

it will increase the camera sensitivity.

This mode is factory default setting SAGC.

White Balance Adjusting

AWB mode—Conventional auto white balance

This mode is factory default setting

-10 -

ATW mode—Advanced white balance

This mode is limited the color temperature into 2500°K-9000°K

Auto Back-light Compensation

This intelligent auto BLC is a newly developed digital light level control
system. It is activated automatically by screen histogram (contrast) and 225
area window weighting integration to control iris gain and white balance
simultaneous, so that the clear object with adequate light level can always be
optimized.

Central Window Weighted average Backlight compensation

This method is suited for cases where the main subject is fixed within the
screen.

Histogram Backlight Compensation

This method is suited for cases where the main subject moves about within
the screen.

The combination of two types Backlight makes it easier to arrange
Backlight compensation operation to match the imaging conditions and
installation location.

Mirror Adjusting

If the camera is installed in the elevators, lifts or viewing directly to the mirror,

please adjust to horizontal mirror mode.

If the camera must be installed upside down due to installation limit, please adjust to
vertical mirror mode.

Day and Night Adjusting

The smart day and night mechanical filter removable allows changing between

color and monochrome mode, and user could define the filter to work correctly

during day time (visible light) and night time (invisible light).

Day and Night Filter Automatic mode:

****Notice: The D/N should be at on position and make sure the AGC/Sense up

at SAGC / Sense up position. If the switchers are at NAGC/ Sense up off, the

filter will be stayed at day time position.

Sense Up Adjusting

Sense up stand for frame integration that is useful for the low lux environment,

the default sense up rate is 4x similar 1/15 sec.

-11 -

Specification (Standard Series)

Image device 1/3” interline transfer SONY Super HAD CCD

Signal system NTSC PAL NTSC PAL

Picture Elements 510 (H) × 492 (V) 500 (H) × 582 (V) 768 (H) × 494 (V) 752 (H) × 582 (V)

Scanning system 525 lines. 2:1 interlace 625 lines, 2:1 Interlace 525 lines. 2:1 interlace 625 lines, 2:1 Interlace

Sync system Internal Lock

Horizontal resolution 420 TV lines 540 TV lines

0.1 lux at F1.2 (30 IRE, AGC on)

Minimum Illumination

0.01lux at F1.2 (B/W mode, AGC on, sense up on)

AGC Auto Gain 36 dB

S/N ratio Better than 50dB

White balance control ATW (2500°K-9000°K)/AWB

Digital Noise

Reduction

Automatic

Gamma 0. 45

Function Dipswitch board in the dome

ALC/AE ALC(1/60 )/AES ALC(1/50 )/AES ALC(1/60 )/AES ALC(1/50 )/AES

AGC ON(36dB)/OFF

ATW/AWB ATW (2500°K-9000°K)/AWB

BLC ON/OFF

H mirror function ON/OFF

V mirror function ON/OFF

Sense up ON(4X)/OFF

IP ratio IP66

Video output signal Composite: 1.0 V p-p at 75Ω load

Lens selection 3.0-12mm F1.4-360 A.I lens (default)

Operating temperature -10°C to 50°C

Power source DC 12V / AC 24V

Power consumption max. average 110-120mA

Dimension

￠155x102(H)mm

-12 -

Specification (Day and Night ICR Series)

Image device 1/3” interline transfer SONY Super HAD CCD

Signal system NTSC PAL NTSC PAL

Picture Elements 510 (H) × 492 (V) 500 (H) × 582 (V) 768 (H) × 494 (V) 752 (H) × 582 (V)

Scanning system 525 lines. 2:1 interlace 625 lines, 2:1 Interlace 525 lines. 2:1 interlace 625 lines, 2:1 Interlace

Sync system Internal Lock/Line Lock

Horizontal resolution 420 TV lines 540 TV lines

0.1 lux at F1.2 (30 IRE, AGC on)

0.001lux at F1.2 (B/W mode, AGC on, sense up on)

Minimum Illumination

0 lux under infrared illumination

Infrared wavelength from 780 to 1100nm

D/N OLPF switch delay

time

5 ~ 8 sec

Color / Mono switching Chain reaction with D/N filter

Frame integration 4x factory default (2x~32x customization)

Infrared LED 35 PCS

IR distance range 20-25M

AGC Auto Gain 36 dB

S/N ratio Better than 50dB

White balance control ATW (2500°K-9000°K)/AWB

Digital Noise Reduction Automatic

Gamma 0. 45

Function Dipswitch board in the dome

ALC/AE ALC(1/60 )/AES ALC(1/50 )/AES ALC(1/60 )/AES ALC(1/50 )/AES

AGC ON(36dB)/OFF

ATW/AWB ATW(2500°K-9000°K)/AWB

BLC ON/OFF

H mirror function ON/OFF

V mirror function ON/OFF

Video / Color ON/OFF

Day/Night Control ON/OFF

Sense up ON(4X)/OFF

IP ratio IP66

Video output signal Composite: 1.0 V p-p at 75Ω load

Lens selection 3.0-12mm F1.6-360 A.I lens(default)

Operating temperature -10°C to 50°C

Power source DC 12V / AC 24V

-13 -

Power consumption max. average 350-360mA

Dimension

￠155x102(H)mm

Standard Accessories

Camera mounting screw*5

Tamperproof screw driver *1 User Manual