Page 1
User’s Manual
Digital Media Repeater
Part #: DL-HDR
Page 2
Congratulations on your purchase of a Digitalinx™ Digital Media Repeater.
This manual contains information that will assist you in the installation and
operation of this product. Please inspect the contents of the package to
ensure all required material is present.
Contents:
(or) 1 each DL-HDR (in-line) Digital Media Repeater
(or) 1 each DL-HDPR (in line panel mount) Digital Media Repeater
this or any devices.
aerosol cleaners. Use a damp cloth for cleaning.
4.) Do not use this equipment near damp or wet locations.
specifi cations. Do not use other sources of power.
electrical outlets. Please refer repair of non-conforming electrical
equipment to certifi ed personnel.
or its associated peripherals.
Page 3
TABLE OF CONTENTS
Table of Contents
Page 4
This Digitalinx™ Digital Media Repeater is an internally powered digital HDMI
types. A reversible 90 degree housing to allow single gang faceplate
The device is compliant with DVI 1.0 and HDMI 1.3 signals. The device is fully
This Digital Media Repeater is ideal for installations where the cable must pass
through a faceplate; wall or a rack mounted Digital video distribution system.
the end of a long copper interconnect to boost the signal at the source.
The system can easily accommodate DVI only inputs and outputs by using
to the sources and display unit while the HDMI connector plugs into the
Product Description and General Specifi cations
ITEM DESCRIPTION
WUXGA 1600x1200, HDTV 1080p
Yes
49x49x52mm
x48mm
Weight
Weight
Page 5
The Digitalinx™ Digital Media Repeater recommended environmental operat-
The Digitalinx™ Digital Media Repeater is expected to function for more than
Environmental Reliability Specifi cations
Page 6
Features
This is necessary because the introduction of a Digital Media Repeater
to ensure 1080p resolution. As a note to the power requirements, the source
the requirements where this limitation exists.
The Digitalinx™ Digital Media Repeater has been designed in three
the device. The DL-HDPR is a 180° of the DL-HDCR for straight panel mount
then out of the wall or junction to a display.
Page 7
The recommended method for connection of devices to the Digital Media
to enjoy the full function of the device. This device can be installed in an
Digitalinx™ Digital Media Repeater.
Digital Media Repeater.
4.) If applicable, power up the Digitalinx™ Digital Media Repeater.
Repeater.
Installation
Page 8
4-40 Threaded holes allow panel mount interface
Mechanical Specifi cations
Page 9
Technical Specifi cations
Up to display 1080p60 (2200x1125@60Hz)
External power from DC Adapter
Technical Specifi cations
Connector pin assignment for
HDMI Type A receptacle
Pin #
Description
TMDS Data 2 +
TMDS Data 2 shield
TMDS Data 2 -
4
TMDS Data 1 +
TMDS Data 1 shield
TMDS Data 1 -
TMDS Data 0 +
TMDS Data 0 shield
TMDS Data 0 -
TMDS Clock +
TMDS Clock shield
TMDS Clock -
Page 10
Warranty Information
to be
free from defects in workmanship and materials, under normal use and service,
for a period of one (1) year from the date of purchase from Liberty Wire & Cable
the defective product.
warranty or not.
Warranty Limitation and Exclusion
Warranty Information
Page 11
Troubleshooting
The Digitalinx™ Digital Media Repeater is designed for years of trouble free
Troubleshooting
Symptom Solution
with those devices. Use the optional DC adapter in these instances.
4.) Ensure the HDMI connectors are securely plugged in, HDMI does not
This issue can be caused when the source device does not have enough
Page 12
www.libertycable.com
Loading...