DigitaLinx DL-1H1V1U-WP-W Owner's Manual

11675 Ridgeline Drive

Colorado Springs, CO

80918

Rev 180227

Phone: 719-260-0061

Toll-Free: 800-530-8998

Fax: 719-260-0075

DL-1H1V1U-WP-W Owners

Manual

DL-1H1V1U-WP-W Owners Manual

Important Safety Instrucons

» Please completely read and verify you understand all instrucons in this manual before operang this equipment.

» Keep these instrucons in a safe, accessible place for future reference.

» Heed all warnings.

» Follow all instrucons.

» Do not use this apparatus near water.

» Clean only with a dry cloth.

» Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)

that produce heat.

» Use only accessories specied or recommended by Intelix.

» Explanaon of graphical symbols:

◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle

symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure which may be of sucient magnitude to constute a risk of shock to a person or persons.

◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended

to alert the user to the presence of important operang and maintenance (servicing) instrucons in the literature accompanying the product.

» WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

» Use the mains plug to disconnect the apparatus from the mains.

» THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.

» Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be

maintained.

» Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the

point where they exit from the apparatus.

» Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.

» Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a

cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.

» Unplug this apparatus during lightning storms or when unused for long periods of me.

» Cauon! Shock Hazard. Do not open the unit.

» Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

DL-1H1V1U-WP-W Owners Manual

Table of Contents

Product Overview �� 5 Package Contents �� 5 Front and Rear Panel �� 6

Transmier View ��6 Transmier View (connued) ��7

Installaon Instrucons �� 8

Quick Start ��8 Connect HDBaseT Link ��8

HDBaseT Connecon .............................................................................................................................. 8

Connecng A/V Sources �� 9

HDMI Input ............................................................................................................................................. 9

VGA Video Input ..................................................................................................................................... 9

Connecng USB Peripherals �� 9

USB Host ................................................................................................................................................. 9

USB Client (Receiver) .............................................................................................................................. 9

Connecng a Display (Receiver) �� 9

HDMI Output .......................................................................................................................................... 9

Connecng Audio ��10

Audio Input ...........................................................................................................................................10

Audio Output (Receiver) .......................................................................................................................10

Connecng Control (Receiver) ��10

RS232 Control Wiring ...........................................................................................................................10

Apply Power �� 10

Applicaon Diagram �� 11 RS232 / CEC Control Conguraon �� 12

CEC Setup and Control ��13 RS232 Control and Conguraon ��14 USB Mode Conguraon ��16 System / Factory Default ��17

Technical Specicaons �� 18

DL-1H1V1U-WP-W Owners Manual

The DigitaLinx DL-1H1V1U-WP-W is a 2x1 auto switching HDBaseT 2.0 transmier that supports the long distance transport of HDMI, VGA and High Speed USB 2.0 signals up to 100 meters / 330’ using category cabling. The DL1H1V1U-WP-W is 4K compable with a max resoluon of 4K@60Hz / 4:2:0 8bit deep color. An addional analog audio pass through input is located on the wall plate that allows for audio distribuon to the HDBaseT receiver side. With 48V integrated PoH, the DL-1H1V1U-WP-W can be powered via HDBaseT receiver with a PSE module or the wall plate can be powered by a local power supply.

The DL-1H1V1U-WP-W gives you the ability to automate the display power ON by using pre-loaded RS232 commands whenever a video signal is introduced to the system using either the HDMI or VGA input. It will also turn the display power OFF aer a specied amount of me has passed when no video signal is present. It also gives you the ability to turn the display ON or OFF as well and switch from one input to another manually from the transmier face plate.

The DL-1H1V1U-WP-W is ideal for situaons where USB must be extended alongside HDMI or VGA for display interacvity for items such as interacve whiteboards or projectors.

For a complete list of programming commands to automate display power status, please see the complete owners manual online at www.libav.com or by using the QR code on the print page of this guide.

NOTE: The DL-1H1V1U-WP-W HDBaseT transmier must be used with the DL-HD2-RX HDBaseT 2.0 receiver (sold separately) to complete the circuit.

Product Overview

Package Contents

• DL-1H1V1U-WP-W HDBaseT Wall Plate Transmier

• (1) Quick Install Guide

• (1) 2 pin Phoenix Male Connector

• (1) 2 gang Decora wall plate cover

• (1) 2m / 6’ USB A to A Cable

DL-1H1V1U-WP-W Owners Manual

Front and Rear Panel

Transmier View

1. VGA Input

2. VGA Audio Input

3. Pass-through Audio Input

4. HDMI Input

5. HDMI LED

• When ON; HDMI signal is being transmied

• When OFF; No HDMI signal is being transmied or signal is unstable

6. VGA LED

• When ON; VGA signal is being transmied

• When OFF; No VGA signal is being transmied or signal is unstable

7. HDCP LED

• When ON; HDCP video is being transmied

• When BLINKING; Non-HDCP video is being transmied

• WHEN OFF; No video is being transmied

8. LINK LED

• When ON; HDBaseT Link is normal

• When OFF / BLINKING; No HDBaseT link or link error

9. POWER LED

• When ON; The transmier is powered on

• When OFF; The transmier is powered o

+ 13 hidden pages

DigitaLinx DL-1H1V1U-WP-W Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual