Digitalinx DL-1H1A1U-WPKT-W User Manual

DL-1H1A1U-WPKT-W Install Guide

Rev 181219

11675 Ridgeline Drive

Colorado Springs, CO

80921

Phone: [phone]

Toll-Free: 800-530-8998

Fax: [phone]

DL-1H1A1U-WPKT-W Install Guide

Product Overview

The Digitalinx DL-1H1A1U-WPKT-W HDBaseT 2.0 extender set transmits HDMI, audio
, USB High Speed (up to 190Mbps) and RS232 over single category 6 twisted pair

cable. The DL-1H1A1U-WPKT-W can transmit 4K resoluons up to 4K@60Hz, 4:2:0 up

to 40m / 120’ and 1080P up to 70m / 230’. The audio circuit is completely separate

and is not dependent on the HDMI or USB input source to be acve. The Digitalinx

DL-1H1A1U-WPKT-W is HDMI 1.4b and HDCP 2.2 compliant and supports CEC pass
through.

The DL-1H1A1U-WPKT-W HDBaseT receiver powers wall plate transmier via HDBaseT

so there is no need for an external power supply for the wall plate.

The DL-1H1A1U-WPKT-W is sold only as a set. The individual transmier and receiver
are not compable with other HDBaseT devices due to proprietary PoE circuitry.

Package Contents

• DL-1H1A1U-WPKT-W Wall plate extender set

• Quick Install Guide

• (1) Decora cover plate

• (1) 3 Pin phoenix connector

• (1) 2 Pin phoenix connector

• (1) DC24V 1A power supply with US, UK, EU and AU power adapter plugs

• (2) Mounng ears with mounng screws

2

Transmier

DL-1H1A1U-WPKT-W Install Guide

Transmier / Receiver View

1

1

5

2

2

1. HDMI IN - Video source input

2. ACTIVE LED

• When LED is green, unit is received acve HDMI signal

• When LED is o, no acve HDMI signal is present

3. AUDIO IN - 3.5 mm analog audio source input

4. USB - USB host port

5. RS232 - Serial port for transming / receiving RS232 signals

6. HDBaseT OUT - HDBaseT output port

7. DC24V - Phoenix connector for connecng external power supply

Note: The DL-1H1A1U-WPKT-W-TX can receive power via HDBaseT from the receiver when
connected together with a Category 6 F/UTP cable

3

3

4

6 7

3