Digital ID View NW-STA-5016, NW-STA-5009, NW-STA-5004 User Manual

NW-STA-5016/5009/5004

USER MANUAL

USER MANUAL

Networked DVR

16CH/9CH/4CH

NW-STA-5016/5009/5004

Networked DVR Product Feature

1

16/9/4 CH Multiple camera Input

4

Able to record the CIF size(320*240) video
Image at the speed of 120/240/480 fps
(frame for second)

5

Large quantity HDD backup function by using
IEEE1394 and USB2.0 Memory and CD/DVD

6

MPEG4 H/W Compression with high compres­sion rate 1~3K

8

Central Integration with CAMS Checker
For Real time Health Check

2

Embedded XP O/S of DOM(Disk On Memory)

solution Mounted

3

Pentapllex Multi tasking for Monitoring
And recording and searching and networking

9

Two Way audio communication and broadcas­tIng by CMS,CM Server

7

Intelligent camera move away detection

2

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

Contents

Contents

Chapter 1 Service Requirement
Chapter 2 Product Information

Chapter 3 Basic Product Operation

Chapter 4 System Setup

Chapter 6 Warranty

Chapter 5 Firmware Upgrade

3

4

6

24

49

52

3

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

Chapter 1

Limitation of warranty

We warrant that DVR series will be free from defects in materials and workmanship
under normal use and service for all parts excluding hard drives for a period of one year after
the date that the customer purchased the product.
If such a defect occurs, you should contact where you purchased and return the product to us
accompanied with the proof of purchase, we will either repair or replace the product through
our inspection. It is your exclusive remedy for breach of this warranty. However this warranty
shall not apply on repairs or replacements necessitated by any cause as listed below.

1) improper installation

2) acts of nature

3) accident

4) lack of proper maintenance

5) voltage fluctuations

6) unauthorized repair or modifications.

For more details on the limitation of warra nty, refer to entire limited warranty as appendix at
the end of this manual.

Service Information

• To avoid additional defects, do not attempt to repair this unit by yourself. Please contact

a local dealer/distributor/certified installer to get s ervice from authorized
technician. Unauthorized repairs will void the warrantee, may result in fire, el ectronic
shock or other hazards.

• All shipment for repair should be prepaid and properly packed with a note outlining the

defect.

• Send the product with purchase number or other related documents obtaining from Fore

Tech or its agent as proof purchasing the product.

Service Requirement

4

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

Chapter 2 Product Information

 Enable integrated video monitoring and system management by networking with maximum
1000DVRs systems through CAMS(Central Automated Monitoring System) interface.

 High quality video display and system stability through embedded operating system with
hardware MPEG4 video compression chip.

 Support the max D1(720*480) quality resolution video display and 120FPS recording.
 4/9/16 CH video input and 4 CH audio input.
 X-Triplex multitasking for video recording, playback, transmission and backup.
 Easy operation using remote-controller, full-page panel, GUI support.
 Network transmission of 30 different types of system error management information per

system.
 High-speed transmitted video monitoring of ST DVRs up to 64 channels through CMS

software network.
 High-speed network video monitoring by internet explorer through WEB CMS server within

the system.

z Features

 Watchdog function for hardware & software error
 Robust design for physical impact and temperature
 Generating 30 different types of network massages for system errors.
 Application of low power and low heat features for industrial environment

z System Design

 Advanced hardware MPEG 4
 Embedded O/S ROM
 4/9/16 Camera input
 Auto-sequence screen division and PIP/POP function.
 Real time display
 Recording : 120fps-NTSC (PAL 100fps)
 4 CH audio recording and two way audio communication.
 CD, DVD RW, USB external saving devices
 Ethernet 10/100Mbps, RS-232C network support
 Maximum 16 ports sensor input and 4 port alarm output
 X-plex multitasking, recording, playback, backup and network.
 STATIC, DHCP, PPPOE support

z General Specifications

5

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

 Firmware upgrade using network and USB port.
 Remote upgrade using CMS
 Free alarm (max 30secs), port alarm (max 120secs) recording
 Watermarking
 Private backup viewer
 E-Map’s layout mapping
 able to install maximum 4 HDD to save 2.5T

6

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

Chapter 3 General product operation

7

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

IV-STA-5016 (16ch)

13) POWER

System Power On/Off

1) VIDEO IN : BNC 16PORT

2) LOOP OUT(75Ω ON/OFF)

3) AUDIO IN : 4 PORT

4) ALARM/SENSOR/RS-485

Connect Port for Sensor (16Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)

5) SPOT OUT

Sequence video display
through AV monitor

6) VIDEO OUT

Output video
through AV Monitor

7) S-VIDEO

Output video through
S-VIDEO comport

8) AUDIO OUT

Out put audio

by 1 port

12) RS-232

Connect Port for Program Debug.

11) VGA

Output Video to a Computer
Monitor by Connected

9) ETHERNET:

Port for Cross cable.
( Possible to Remote Surveillance.)

10) USB

USB port for use the USB memory backup

and USB update.

FRONT CASE Button Description

FRONT CASE Button Description

REAR PANEL I/O Description

REAR PANEL I/O Description

IV-STA-5016 (16ch)

division button

Search button

Rec

. button

Menu button

Move button

USB Port:

2 PORT

USB port for use the USB
memory backup and USB
update

Records images

Shows the menu, moves to upper menus and complete setup

Moves to setup and menu. Operates PTZ camera

Numeric buttons

Applies setup details and select
channel

CD-ROM

Searches saved data

LED Indicator

SEQ. button

SPOT button

Setup SPOT monitor

PTZ. button

Play backward button

Stop button

Play forward button

Max. x 128 play forward.

Frame by frame play forward on playback

Stops playback and converts to surveillance mode

Max. x 128 play backward .
frame by frame play backward on data playback

Division rotating surveillance button

Operates Pan/Tilt camera

Setup Status, Audio, Backup, P/T/Z, SEQ, Log list

Function button

Indicate present system status information

Pause and playback the image

Pause button

1ch,4ch,9ch,16ch division button

8

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

13) POWER

System Power On/Off

1) VIDEO IN : BNC 9PORT

2) LOOP OUT:

Output video by BNC

9Port (75Ω AUTO)

3) AUDIO IN : 4 PORT

4) ALARM/SENSOR/RS-485

Connect Port for Sensor (9Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)

5) SPOT OUT

Sequence video display
through AV monitor

6) VIDEO OUT

Output video
through AV Monitor

7) S-VIDEO

Output video through
S-VIDEO comport

8) AUDIO OUT

Out put audio

by 1 port

12) RS-232

Connect Port for Program Debug.

11) VGA

Output Video to a Computer
Monitor by Connected

9) ETHERNET:

Port for Cross cable.
( Possible to Remote Surveillance.)

10) USB

USB port for use the USB memory backup

and USB update.

IV-STA-5009 (9ch)

FRONT CASE Button Description

FRONT CASE Button Description

REAR PANEL I/O Description

REAR PANEL I/O Description

IV-STA-5009 (9ch)

division button

Search button

Rec

. button

Menu button

Move button

USB Port:

2 PORT

USB port for use the
USB memory backup
and USB update

Records images

Shows the menu, moves to upper menus and complete setup

Moves to setup and menu. Operates PTZ camera

Numeric buttons

Applies setup details and select
channel

CD-ROM

Searches saved data

LED Indicator

SEQ. button

SPOT button

Setup SPOT monitor

PTZ. button

Play backward button

Stop button

Play forward button

Max. x 128 play forward.
Frame by frame play forward on playback

Stops playback and converts to surveillance mode

Max. x 128 play backward .
frame by frame play backward on data playback

Division rotating surveillance button

Operates Pan/Tilt camera

Setup Status, Audio, Backup, P/T/Z, SEQ, Log list

Function button

Indicate present system status information

Pause and playback the image

Pause button

1ch,4ch,9ch division button

9

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

7) ETHERNET:

Port for Cross cable
( Possible to Remote

Surveillance.)

12) DC POWER Input

Power Supply by
DC12V Adaptor

1) VIDEO IN

Input video by
BNC 4PORT

2) LOOP OUT

Output video
by IV-STA-5004 :
BNC 4Port

(75Ω AUTO)

3) VIDEO OUT

Output video

through AV
Monitor

5) S-VIDEO

Output video
through S-VIDEO
comport

6) AUDIO IN

Input audio
by 4 Port

4) AUDIO OUT

Output audio

by 1 Port

8) RS-232

Connect Port for
Program Debug.

10) ALARM/SENSOR/RS-485

Connect Port for Sensor (4Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)

8) RS-232

Connect Port for

Program Debug.

11) POWER

System Power On/Off

IV-STA-5004 (4ch)

FRONT CASE Button Description

FRONT CASE Button Description

REAR PANEL I/O Description

REAR PANEL I/O Description

IV-STA-5004 (4ch)

division button

Play backward button

Stop button

Play forward button

Pause button

1ch,4ch division button

Search button

Searches saved data

Stops playback and converts to surveillance mode

Pause and playback the image

Menu button

Move button

Shows the menu, moves to upper menus and

complete setup

Moves to setup and menu. Operates PTZ camera

Setup Status, Audio, Backup, P/T/Z, SEQ, Log list

Function button

Max. x 128 play forward.
Frame by frame play forward on playback

USB Port:

2 PORT

USB port for use the
USB memory backup
and USB update

Max. x 128 play backward .

Frame by frame play backward on data playback

CD-ROM

PTZ. button

Operates Pan/Tilt camera

Rec. button

Records images

Numeric buttons

Applies setup details and select channel

LED Indicator

Indicate present system status information

10

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

Power on/off

zPower on

Press the power button at the back to be ‘ON’ to turn it on after connecting the power

cable.

zPower off

① press ‘Menu’ button [menu Æ system Æ shutdown]
② select ‘Shutdown’ and press ‘Enter’ button.
③ sele ct ‘OK’ button after the message “ system will shutdown”. Press ‘Enter’ button.
④ press the power switch at the back to be ‘Off’.

System Login

zInput password

Input the password using number buttons at the password box.

☞

The default value is ‘0000’.

11

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

Screen display

[ Channel status ]
Channel number
Camera name

: Recording
: Motion detection in process
: Sensor detection in process
: Channel sequence indication
: PTZ indication

[ Playback status ]

: Playback in progress
: Pause
: Playback per frame : Play backward per frame
: Speed playback : Speed play backward
: Double speed playback
: Double speed play backward
: Triple speed playback
: Triple speed play backward

[ HDD status ]

HDD indication

A : master hard
B : slave hard
C : master hard
D : slave hard

* color icon indications

blue : HDD installed.
yellow : recording in progress
orange : Hard disk is full
red : Hard disk error

[ Slide bar ]

: CMS connection status

: USB device connection status
Date & time
Remote controller status

12

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

z Full screen mode

- press this button.

- shifts to next channel each time you press this button.

z Quad screen mode

- press this button.

- shifts to the next channel each time you press this button.

- If you press a channel number button on remote-controller while
being displayed in the current quad screen, the selected channel turns full screen.

Screen setup

1 CAM011 CAM01 2 CAM02

3 CAM03 4 CAM04

1 CAM01 2 CAM02

3 CAM03 4 CAM04

5 CAM05 6 CAM07

7 CAM07 8 CAM08

1

6

-If you press another channel number that is not being displayed in the current quad screen, it turns

another quad screen including the channel you selected.

13

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

OSD button

z9 division screen mode

- press this button

z16 division screen mode

- press this button

zPOP screen mode *only for 9Ch & 16Ch products

-press ‘POP’ button, it will display a certain channel larger than other channels.

zOSD mode

- press ‘OSD’ button, icons and channel status phrases will appear or disappear.

14

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

zPIP screen mode

You can monitor 2 screens at the same time with small screen inside of one screen.

(1) press ‘PIP’ button on the remote controller.
(2) press ‘PIP’ button one more time the display channels will be exchanged.

(3) If you press a channel number button on the controller, the channel will be displayed in

small screen.

Ex)

(4) you can move the small screen using arrow buttons.

z Sequence playback screen mode

- If you press ‘SEQ’ button, full screen or quad screen will be displayed in sequence.

- you can setup duration time at system menu.

1

2

‘PIP’ Button

‘PIP’ Button

2

1

1

2

Cam ‘3’ Button

Cam ‘3’ Button

1

3

15

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

zSPOT screen * only for 9Ch & 16Ch products

able to display real time screen of another screen-mode in different monitor using ‘SPOT OUT’ port
at the back of product.
▶Press ‘Function’ button and select ‘Spot’ to set up ‘SPOT’ screen.

(1) type

① single channel

▷playback only one selected channel in full screen

mode.

② sequence single

▷playback each channel in full screen mode in sequence.
▷you can setup duration time at system menu.

③ sequence quad

▷playback channels in quad screen mode in sequence.

[IV-STA-5009] [IV-STA-5016]

▷you can setup duration time at system menu.

No. Camera

1 Camera 1 ~ Camera 4

2 Camera 5 ~ Camera 8

3 Camera 6 ~ Camera 9

Quad No. Camera

1 Camera 1 ~ Camera 4

2 Camera 5 ~ Camera 8

3 Camera 9 ~ Camera 12

4 Camera 13~ Camera 16

SPOT

SINGLE CHANNEL

CH1

SINGLE CHANNEL
SEQ SINGLE
SEQ QUAD

SPOT

SINGLE CHANNEL

CH1

CH1
CH2
CH3
CH4
CH5
CH6
CH7

16

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

z press (ZOOM) button in full screen mode to active digital zoom.

z zoomed area moves as you press arrow buttons.

z size of zoomed area gets bigger and smaller as you press (ZOOM ) button one more time.

z press ‘Enter’ button, it shows the selected area bigger like the images below.

Digital zoom

Z/F

Z/F

Recording

z press ‘REC’ button to start recording.

Check before recording !!

(1) Check if hard disk is formatted.
(2) Check the camera output.
(3) Check if each channel names are correct.
(4) Set each channel’s recording quality.
(5) Set each channel’s recording frames.

17

Page:

NW-STA-5016/5009/5004 User Manual

User Manual

Search

z press ‘SEARCH’ button. Then you can see the ‘Search’ menu like below.

z Search by time

(1) input the date and time to search. Press ‘Enter’ button.

z Search by calendar

(1) you can see ‘calendar’ menu like below if you select ‘Search by calendar’.
(2) select the date and time using arrow keys. Press ‘Enter’ button.
(3) lastly, select ‘OK’ and press ‘Enter button’.

SEARCH

SEARCH BY TIME

SEARCH BY CALENDAR

SEARCH BY EVENT

GO TO FIRST

GO TO LAST

SEARCH BY CALENDER

2008/ 2

SU MO TU WE TH FR SA

1 2

3 4 5 6 7 8 9
1011 12 13 14 15 16

1718 19 20 21 22 23
24 25 26 27 28 29

2008/02/16 13:00 OK

CLOSE

0 5 10 15 20

0 10 20 30 40 50