Digital ID View IV-DVFH6100IR-700W Quick Start Manual

Quick Start Guide

Item Number: IV-DVFH6100IR-700W

Thank you for purchasing our products.

Please read this Quick Start Guide carefully before operating.

Safety Precaution

Warning

 To prevent fire or shock hazard, please insure all connections are not

exposed to the elements.

 Please make sure the adapter is consistent with camera’s specifications,

otherwise it might cause fire, electric shock or damage.

 Pay attention to the polarity of the adapter, reversing polarity may

damage the camera and possibly even fire.

 Please don’t connect multiple cameras to the same adapter without

verifying the capacity of the adapter, exceeding the adapter’s capacity
may cause fire.

 Power supply must be firmly connected to prevent fire.
 If the device emits an abnormal smell or smoke, please disconnect power

immediately and contact our customer service center.

 If the camera doesn’t work properly, please do not dismantle /

disassemble it by yourself. Please contact your local distributor or our
authorized dealer, or you may void the warranty.

 Please do not splash water on unsealed connections or product

components when cleaning.

Technical Specifications

Item Number: IV-DVFH6100IR-700W
Signal System: NTSC
Sensor CCD: Sony Effio-E
Horizontal resolution: 700 TV lines
Lens: 2.8-12mm
Minimum Illumination: 0 LUX (IR ON)
S/N Ratio: More than 48 Db
Distance: 100 feet
LED: 36PCS LED
Video Output: 1Vp-p 75Ω. Y/C Separated
Connector video : BNC
Operation Temperature: -4°F to +122°F
Supplied Power: 12VDC(+/-10%)