Digital Equipment DHS-SNS-DW-VIS-04 Quick Installation Manual

Z-Wave Home Automation Solutions

Being one of the most advanced Home Automation systems to date, Z-Wave is
dependable, affordable and most importantly easy to assemble without laying
down expensive cables.
The whole Z-Wave Home Automation system is based around the central home
controller, a Z-Wave gateway, which monitors the states of the devices around it
and issues commands using a secure encrypted channel. You can issue
commands to your Z-Wave gateway and control the state of your devices via your
smartphone or PC using an internet connection. The Z-Wave gateway can also be
set to automatically turn devices ON/OFF when a sensor is tripped.
Z-Wave devices are not only able to communicate with their associated Z-Wave
gateway but also any nearby devices in the network. AC powered Z-Wave
devices are also capable of forwarding commands from the Z-Wave gateway to
neighboring devices, effectively increasing the range of your network and assuring
its responsiveness is not only fast but also reliable. All devices displaying the Z-Wave
logo are interoperable regardless of whether they were produced by the same
manufacturer.

For example you can configure your Z-Wave system to automatically turn on a
siren when a motion sensor is tripped. You can also configure your Z-Wave network
to send you automated notifications via SMS or email and to save pictures or
footage depending on which devices become tripped in your home. You can
arm or disarm your system on the go with your smart phone or at home with a
conveniently placed switch. You can schedule your light to turn ON and OFF
depending on the time of day, your presence at home or other triggers/events.
Not only does Z-Wave allow you to remotely monitor and control your home it also
allows you to create unlimited scenarios to enhance your way of life. You can
remotely turn on your central heating before you come home or turn off your

child’s night lamp when they fall asleep. The list is endless...

You don’t have to build your entire home automation system in one go. You can

add new devices to your Z-Wave network whenever you wish in allowing you to
tailor your system to your ever-changing needs.

FEATURES

 Door/Window, humidity, temperature and illuminance s ensor in

one device.

 Primarily used as dry contact Door/Window senso r, it consists of

two parts, magnet and a sensor.

 New Z-Wave 500 series chip supports multichannel operatio n and

higher data rates (9.6/40/100kbps)

 Can be used with various Z-Wave networks/con trollers, regardless

of the manufacturers

 Very low power consumption
 Low battery auto report LED indicator
 Over-the-air firmware updates available
 Easy installation

Thank you for choosing the VISION Z-Wave D/W Senso r 4in1 (door/window
contact sensor, humidity sensor, temperature sensor, and light senso r). This
sensor is a Z-Wave enabled device (interoperable, two -way RF mesh
networking technology) and is fully compatible with any Z -Wave enabled
network and its security framework. The VISION Z- Wave D/W Sensor 4in1 sends
a Z-Wave signal when a door or window is opened/c losed or there is a
humidity, temperature, luminance change.

Package Contents

1) VISION Z-Wave D/W Sensor 4in1

2) Bracket for Magnet

3) Magnet, Screws, Adhesive tape, 2 x AAA Batteries

4) Quick Installation Guide

Item

Description

RF Protocol

Z-Wave (MultiLevel Command Class)

Z-wave device type

Z-wave Sensor Alarm

Operating Voltage

2 x AAA batteries

RF Frequency

921.42Mhz AU/NZ

Operation Range

Up to 30m when no obstacles

Application

Indoor use only

Operation
Temperature

-10 ° C to 60 ° C
Storage

Temperature

-10 ~ 80 °C
Weight

60g

Housing

ABS

Specifications are subject to change without further notice

The information in this document is subject to change without notice. Digital Home Systems Pty

Ltd (DHS) does not make any representations or warranties (implied or otherwise) regarding the

accuracy and completeness

of this document and shall in no event be liable for any loss of profit or any commercial damage,

including but not limited to special, incidental, consequential, or other damage.

TRADEMARKS

All trademarks and registered trademarks are the property of their respective owners or

companies.

DHS One (1) Year Limited Warranty

Digital Home Systems Pty Ltd warrants this DHS branded hardware product against defects in

materials and workmanship under normal use for period of one (1) year from the date of retails

purchase by the original end user purchaser (‘Warranty Period’). PLEASE NOTE: breaking security

label will void the warranty.

Terms and conditions

To see complete terms and conditions browse to

http://www.digitalhomesystems.com.au/images/stories/DHS_Terms_and_conditions.pdf

Quick Installation Guide

VISION Z-Wave

D/W Sensor 4in1

CATALOGUE NO:

DHS-SNS-DW-VIS-04

1 Installation

Mounting

Push release button to open rear cover of the multi-s ensor.
Use screws or adhesive tape to mount rear cover on the frame along the
opening edge of a door/window.

Attach the magnet to the door or window frame using scre ws or adhesive
tape.
Ensure that the distance between the magnet and mult i-sensor is less than
two centimetres when the door/window is closed.

Include or exclude in Z-Wave network

1. Make sure your Z-Wave controller is in the right operation mode (include
or exclude).

2. Press and hold the program switch for 1 second and release to start the
inclusion or exclusion process (indication mode: Ready for learn mode)
If you are using NWI include mode with your Z- Wave controller please note
that this device will be NWI mode for 30 seconds after the ins ertion of
batteries.

2 Operation

Configuration

Parameter

Number

Size

Value

Preset

1 (temperature)

1

⁰C

0x00

⁰C(0x00)

⁰F

0x01

2 (temperature) 1 1~50

(set from 0.1⁰C ~ 5⁰C)

1(⁰C)

3 (humidity) 1 1~50

(set from 1% ~ 50%)

10%

4 (light) 1 0/5~50

(set from 0(off) or 5% ~ 50%)

10%

Awake Mode

Press the program switch to set this device to Awake M ode. It will notify its
associated Z-Wave gateway and receive any new c ommands before going
to sleep.

Auto Wake Up

You can use your Z-Wave gateway to set up the amo unt of time this device
will wait between each wake up. The default is set to 180 0 seconds. Please
note: reducing this will cause the battery to deplete faster.

Low Battery Auto Report

Low battery is set as 2.6 ± 0.1V and is detected every 2 hours.

Supporting Command Classes

Class:GENERIC_TYPE_SENSOR_ALARM
Z-Wave Lib: 4.5
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_ASSOCIATION_V2 COMM AND_CLASS_BATTERY
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_NOTIFICATION_V4 COMM AND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY COMMAND_CLASS_SENS OR_MULTILEVEL_V7
COMMAND_CLASS_VERSION_V2 COMMAND_CLASS_ WAKE_UP_V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2

3 Troubleshooting

NOTE: Before including the product to your Z-wave ne twork it is advised to
perform removal procedure to reset network settings.

Frequently Asked Questions

Q: I can’t include my Z-Wave 4in1 D/W sensor into my Z-Wave net work, what
am I doing wrong?
A1. Ensure that your Z-Wave controller is ready to include a new device by
placing it into include mode.
A2. The Z-Wave 4in1 D/W Sensor is already included in a different Z-Wave
network. Exclude the Z-Wave 4in1 D/W Sensor using your Z-Wave gateway
and try to include it again.
Q: Why does the program switch on the Z-Wave 4i n1 D/W Sensor not work?
A: Check if the batteries of the Z-Wave 4in1 D/W Sensor are prope rly
connected.

Indication modes

The indicator gives various statuses of the device as follows:

1. Learn mode success: Indicator light blinks once.

2. Learn mode failed: Indicator light blinks five times.

3. The LED will flash once every minute or when the progra m switch is
pressed. The color represents the current temperature according to this
table:

Temperature

LED Color

Under 15⁰C

Green

15⁰C ~23⁰C

Blue

23⁰C ~28⁰C

Yellow

28⁰C ~36⁰C

Orange

Over 36⁰C

Red

Factory Reset

Open rear cover to send alarm report then press the program sw itch 10
times rapidly to reset the Z-Wave 4in1 D/W Sensor .

This device is using a radio signal that passes through walls, windows and
doors. The range can be influenced by loc al conditions such as large metal
objects, house wiring, conc rete, furniture, refrigerators, microwa ves and
similar items. On average, the indoor range is approxima tely 12- 30 meters.

Do not expose this product to excessive heat or moisture.
Prevent long term exposure to direct sunlight.
Do not attemp t to repair this product. If the product is damaged or if you
are in doubt a bout the proper operation, take the product back to the
place of purchase.
Do not clean the product with any liquid.
Do not paint.