Digital Equipment DECserver 700 Hardware Installation Card
For: ROCH
Printed on: Mon, Jan 20, 1992 10:38:56
Document: DS700_CARD
Last saved on: Mon, Jan 20, 1992 10:29:43
pl2ps 4.0.5 Copyright 1988 Interleaf, Inc.
EK-DSRVW-IN.001
DECserver 700
Hardware Installation Card
Rear View DECserver 700-16
Rear View DECserver 700-08
LKG-5809-91l
LKG-5810-91l
Power cord
Server feet
Installation Card
Software license
Rack-mount kit
Blank ID labels
for cables
Loopback connector
H4082-AA
(DECserver 700-16
server only)
DECserver 700
Site Preparation
and Maintenence
FTZ card (Austria/
Germany only,
DECserver 700-16
server only)
Check the Contents of the Box
If any part is damaged or missing, contact your
Digital Equipment Corporation sales representative.
2
Verify the Site
Verify that:
1. The devices (modems, printers, PCs, and terminals) and their cables are installed.
2. An Ethernet cable is installed.
3. A power socket is available within 1.8 meters
(6 feet) of the server position.
4. If you are to rack-mount the server, have available a number 1 or 2 crosspoint screwdriver
or a 3 mm (1/8 inch) flat blade screwdriver.
Place the Server – Desktop
1. Turn the server upside down.
2. Remove the backing from the feet.
3. Stick the feet to the server.
LKG-5812-91l
4. Allow for 15 centimeters (6 inches) of airspace
around the server air vents.
3
Loading...